London · England
Telescopic bollard installation in Bexley
Planning telescopic bollards in Bexley? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageTelescopic bollards in Bexley
Whether it's mews courtyards, office entrances and school gates, telescopic bollards in Bexley are planned around who needs to get through and who doesn't. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We work across DA5, DA7, DA6, DA16, DA8 and DA17 — Bexley itself and places including Coldblow, Sidcup and Erith. Jobs in Bexley can be combined with work in Dartford (3.2 miles), Greenwich (4.2 miles), Swanley (4.6 miles) and Barking and Dagenham (6.6 miles) (straight-line distances).
Bexley at a glance
- Area
- London, England
- Highway authority
- Bexley Council (local roads)
- Planning authority
- Bexley Council
- Postcodes
- DA5, DA7, DA6, DA16, DA8, DA17, DA18 and DA15
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Dartford (3.2 mi), Greenwich (4.2 mi), Swanley (4.6 mi), Barking and Dagenham (6.6 mi)
Typical telescopic bollards jobs in Bexley
Around Bexley, telescopic bollards usually solve one of these:
- Sites with no power for automatic bollards
- Commercial yards where posts must not be left lying around
- Domestic driveways where the bollard is used daily
Telescopic bollard prices in Bexley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Bexley
Bexley Council is the highway authority covering Bexley's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Bexley Council) first — we flag this at survey.
Positions are scanned and hand-dug before committing. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
How the job runs
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Options to consider
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
Pricing telescopic bollards in Bexley
When we price telescopic bollards in Bexley, these make the biggest difference:
- Surface type and quality of reinstatement
- Stainless or powder-coated finish
- Drainage: simple soakaway or a connection to a drain
Keeping them working
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lubricate the lock with a suitable spray, especially before winter.
We can also service, repair or replace existing posts anywhere in Bexley.
Questions about telescopic bollards in Bexley
Do you install telescopic bollards in Bexley?
We cover all of Bexley (DA5, DA7, DA6, DA16, DA8 and DA17) and the rest of London. We also work in Dartford, Greenwich and Swanley.
Who gives permission for bollards on the pavement in Bexley?
Bexley Council is the highway authority covering Bexley's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do telescopic bollards cost in Bexley?
In Bexley, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.
Telescopic bollards near Bexley
- Dartford (3.2 mi)
- Greenwich (4.2 mi)
- Swanley (4.6 mi)
- Barking and Dagenham (6.6 mi)
- Lewisham (6.8 mi)
- South Ockendon (6.8 mi)