London · England
Removable bollard installation in Bexley
Removable bollards supplied and fitted in Bexley, London: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRemovable bollards in Bexley
We supply and fit removable bollards throughout Bexley, typically for sites such as station forecourts, estate car parks and places of worship. When the post is out, the socket is closed with a hinged lid or cap so the surface is flush.
Coverage in Bexley takes in the DA5, DA7, DA6, DA16, DA8 and DA17 postcode districts and nearby places like Coldblow, Sidcup and Erith. Nearby, we also work in Dartford (3.2 miles), Greenwich (4.2 miles), Swanley (4.6 miles) and Barking and Dagenham (6.6 miles), measured as the crow flies.
Bexley at a glance
- Area
- London, England
- Highway authority
- Bexley Council (local roads)
- Planning authority
- Bexley Council
- Postcodes
- DA5, DA7, DA6, DA16, DA8, DA17, DA18 and DA15
- Guide price
- Typically £265–£895 per bollard + VAT (£315–£1,045 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Dartford (3.2 mi), Greenwich (4.2 mi), Swanley (4.6 mi), Barking and Dagenham (6.6 mi)
What removable bollards cost in Bexley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £265–£525 + VAT · £315–£625 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £455–£715 + VAT · £545–£855 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £645–£895 + VAT · £765–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Where removable bollards go in around Bexley
Typical reasons Bexley sites choose removable bollards:
- Emergency and fire service access routes
- Maintenance tracks through parks and open spaces
- School gates closed during drop-off and pick-up
Consents, ground and services in Bexley
The highway authority for local roads in Bexley is Bexley Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Bexley Council) first — we flag this at survey.
Removable bollards need modest depth, which makes them one of the easier bollards to fit around services. A socket set even a few millimetres proud becomes a trip edge and gets clipped by tyres and snow ploughs; one set low collects water and grit.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
- Check whether the location is public highway; a highway authority agreement is usually needed there.
Installation, step by step
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Set the socket flush
The socket is set in concrete with its rim exactly at finished surface level and to the fall of the ground, so the lid sits flat and nothing catches on it.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Heads and handles | Dome, flat or ball heads, with lifting handles or eyes so posts can be pulled out without strain. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
| Socket lids | Spring-closing, hinged or lockable lids that sit flush when the post is removed, so there is no open hole. |
What affects the quote
Our South East guide prices are a starting point; the survey in Bexley firms them up. What tends to move them:
- Number of posts and sockets
- Lock type and whether locks are keyed alike
- Rated removable posts where security is required
Keeping them working
Lubricate locks a few times a year with a graphite or lock-specific spray, lift the posts out periodically even if they are not needed, and clear the socket of debris. Check the lid springs and hinges.
We can also service, repair or replace existing posts anywhere in Bexley.
Questions about removable bollards in Bexley
Do you install removable bollards in Bexley?
We cover all of Bexley (DA5, DA7, DA6, DA16, DA8 and DA17) and the rest of London. We also work in Dartford, Greenwich and Swanley.
Do I need consent for removable bollards on a public footway in Bexley?
The highway authority for local roads in Bexley is Bexley Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for removable bollards in Bexley?
In Bexley, typically £265–£895 per bollard with ground socket, supplied and installed, plus VAT (£315–£1,045 including VAT for homeowners), with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can removable bollards be installed on block paving?
Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.
Can all the bollards on our site use one key?
Yes, if the locks are ordered keyed alike. That is common on estates and car parks with several access points. Spare keys can be supplied at the same time.
Removable bollards near Bexley
- Dartford (3.2 mi)
- Greenwich (4.2 mi)
- Swanley (4.6 mi)
- Barking and Dagenham (6.6 mi)
- Lewisham (6.8 mi)
- South Ockendon (6.8 mi)