London · England
Shallow-mount security bollard installation in Bexley
Shallow-mount bollards for sites across Bexley and the rest of London, from the first measurement to the last relaid paving block.
Computer-generated imageShallow-mount bollards in Bexley
From shopping parades, places of worship and office entrances, Bexley has plenty of places where shallow-mount bollards earn their keep. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
We work across DA5, DA7, DA6, DA16, DA8 and DA17 — Bexley itself and places including Coldblow, Sidcup and Erith. Jobs in Bexley can be combined with work in Dartford (3.2 miles), Greenwich (4.2 miles), Swanley (4.6 miles) and Barking and Dagenham (6.6 miles) (straight-line distances).
Key facts for this area
- Area
- London, England
- Highway authority
- Bexley Council (local roads)
- Planning authority
- Bexley Council
- Postcodes
- DA5, DA7, DA6, DA16, DA8, DA17, DA18 and DA15
- Guide price
- Typically £2,095–£9,545 per bollard + VAT; minimum job £5,295
- Survey
- Free, with a fixed written quote
- Nearby
- Dartford (3.2 mi), Greenwich (4.2 mi), Swanley (4.6 mi), Barking and Dagenham (6.6 mi)
Bexley: typical shallow-mount bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,095–£5,245 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,345–£7,445 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,545–£9,545 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What Bexley sites use shallow-mount bollards for
Typical reasons Bexley sites choose shallow-mount bollards:
- Lines that must cross over shallow drainage or ducts
- Podium decks, car park roofs and basement slabs
- Bridges and structures where excavation depth is limited
What we check first in Bexley
The highway authority for local roads in Bexley is Bexley Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Bexley Council) first — we flag this at survey.
Shallow does not mean simple. On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail.
- Record the frame's position on as-built drawings so future excavation near the line can be planned safely.
- Agree works and separation distances with utility owners, and with the highway authority where the line is on public highway.
From survey to handover
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Finishes and options
| Option | Detail |
|---|---|
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
| Removable posts within a run | Some systems include removable or retractable positions for maintenance or emergency access. Check how these affect the rating. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
Pricing shallow-mount bollards in Bexley
When we price shallow-mount bollards in Bexley, these make the biggest difference:
- Amount of hand digging needed around live services
- Lifting, storing and relaying natural stone paving
- Length of run and the system needed to achieve the rating
Looking after them
Any later utility work beside the line should be supervised so the frame is not undermined. Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands.
If posts in Bexley are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you install shallow-mount bollards anywhere in Bexley?
We cover all of Bexley (DA5, DA7, DA6, DA16, DA8 and DA17) and the rest of London. We also work in Dartford, Greenwich and Swanley.
Do I need consent for shallow-mount bollards on a public footway in Bexley?
Bexley Council is the highway authority covering Bexley's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do shallow-mount bollards cost in Bexley?
In Bexley, typically £2,095–£9,545 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,295 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.
Shallow-mount bollards in nearby towns
- Dartford (3.2 mi)
- Greenwich (4.2 mi)
- Swanley (4.6 mi)
- Barking and Dagenham (6.6 mi)
- Lewisham (6.8 mi)
- South Ockendon (6.8 mi)