Renfrewshire · Scotland
Timber bollard installation in Renfrew
Local installation of timber bollards in Renfrew — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout timber bollards in Renfrew
From community car parks, schools and local parades, Renfrew has plenty of places where timber bollards earn their keep. Timber bollards deter and guide vehicles; they are not tested barriers.
We cover every part of Renfrew in the PA4 postcode district. Nearby, we also work in Clydebank (2.1 miles), Erskine (3 miles), Paisley (3.2 miles) and Bearsden (3.8 miles), measured as the crow flies. Glasgow is around 5 miles away.
Local details
- Area
- Renfrewshire, Scotland
- Roads authority
- Renfrewshire Council (local roads)
- Planning authority
- Renfrewshire Council
- Postcodes
- PA4
- Guide price
- Typically £95–£345 per post + VAT (£105–£405 inc VAT for homes); minimum job £445
- Survey
- Free, with a fixed written quote
Guide prices for Renfrew
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £95–£205 + VAT · £105–£245 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £175–£275 + VAT · £205–£325 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £245–£345 + VAT · £285–£405 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Where timber bollards go in around Renfrew
Around Renfrew, timber bollards usually solve one of these:
- School frontages and nursery entrances
- Verges on estates and rural lanes
- Footpath and bridleway entrances
What we check first in Renfrew
For anything on the public footway in Renfrew we check with the roads authority first — Renfrewshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Renfrewshire Council can confirm before anything is ordered.
Verges on rural lanes and estates often carry water mains, telecoms cables and drainage, so services are checked before augering. Clay holds water against the timber and benefits from a free-draining stone base; sandy ground may need a concrete surround to stop posts loosening.
- Keep emergency vehicle access available, using a removable or hinged post where a route must open.
- Check whether the verge is highway land; posts there usually need the roads authority's agreement.
From survey to handover
Survey the setting
A free site survey looks at the ground, drainage, tree roots, how vehicles currently get onto the land and how the site looks. You receive a fixed written quote with species, size and fixing.
Dig the holes
Holes are dug by hand or auger to the required depth, avoiding roots and checking for services along verges and footpaths.
Set the posts
Posts are set plumb and to a consistent height, backfilled with compacted stone or concreted with a shaped top. Cut softwood ends are re-treated.
Choosing the right spec
| Option | Detail |
|---|---|
| Tropical hardwood | Very dense and long-lasting in ground contact. Specify certified sustainable sources. |
| Treated softwood | Pressure-treated pine for ground contact, economical for long runs on verges and rural sites. |
| Removable and lockable posts | Timber posts in steel sockets, or hinged timber posts, for maintenance and emergency access. |
What affects the quote
Two Renfrew jobs with the same number of posts can price quite differently. The usual reasons:
- Number of posts and length of the line
- Removable or hinged posts for access
- Species: treated softwood, oak or tropical hardwood
After installation
Re-treat cut or damaged softwood, keep grass and soil from building up around the base, and replace posts that are soft at the ground line before they snap. New oak can release tannin that stains nearby paving for the first season; this weathers away.
If posts in Renfrew are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about timber bollards in Renfrew
Can you install timber bollards anywhere in Renfrew?
We cover all of Renfrew (PA4) and the rest of Renfrewshire. We also work in Clydebank, Erskine and Paisley.
Do I need consent for timber bollards on a public footway in Renfrew?
For anything on the public footway in Renfrew we check with the roads authority first — Renfrewshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
How much do timber bollards cost in Renfrew?
In Renfrew, typically £95–£345 per post, supplied and installed, plus VAT (£105–£405 including VAT for homeowners), with a minimum job of £445 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Do timber bollards stop vehicles?
They stop most drivers deliberately mounting a verge and resist low-speed knocks, especially in dense hardwood. They are not tested barriers and should not be relied on against a vehicle driven at them deliberately.
Should timber posts be set in concrete?
Only with care. Concrete holds the post firmly but can trap water around it at ground level, where rot starts. A free-draining base and a concrete collar shaped to shed water help, and compacted stone backfill is often better in clay.