Aberdeenshire · Scotland
Warehouse and loading-bay bollards in Ellon
Warehouse impact bollards for sites across Ellon and the rest of Aberdeenshire, from the first measurement to the last relaid paving block.
Computer-generated imageAbout warehouse impact bollards in Ellon
We supply and fit warehouse impact bollards throughout Ellon, typically for sites such as community car parks, filling-station forecourts and schools. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
Coverage in Ellon takes in the AB41 postcode district and nearby places like Tarves, Pitmedden, Methlick and Foveran. We also cover neighbouring Inverurie (12.6 miles), Peterhead (14.5 miles), Aberdeen (15.3 miles) and Westhill (16.5 miles) — distances are straight-line.
Ellon at a glance
- Area
- Aberdeenshire, Scotland
- Roads authority
- Aberdeenshire Council (local roads)
- Planning authority
- Aberdeenshire Council
- Postcodes
- AB41
- Guide price
- Typically £175–£1,195 per bollard + VAT; minimum job £445
- Survey
- Free, with a fixed written quote
Ellon: typical warehouse impact bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£605 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £485–£905 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £785–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; no regional adjustment. Guide only — the fixed price follows a survey.
Warehouse impact bollards in Ellon: common uses
Around Ellon, warehouse impact bollards usually solve one of these:
- Racking ends and corners in busy aisles
- Charging stations for forklifts and pallet trucks
- Building columns in forklift aisles and turning areas
Permissions and groundwork in Ellon
Ellon falls under Aberdeenshire Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
Many private-land installations in Ellon need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Aberdeenshire Council before posts go in.
Warehouse floors vary from thick reinforced slabs to thin toppings over older concrete, and some contain underfloor heating, ducting or wire-guidance systems for automated trucks that must not be cut. Where a slab is too thin or poor, the options include through-bolting, a larger base plate to spread load, a polymer bollard that reduces anchor forces, or breaking out and casting a new local foundation.
- Keep fire exits, escape routes and fire equipment accessible; bollards must not narrow escape routes below their required width.
- Where impact performance matters, ask for products tested to PAS 13 and match the stated performance to your vehicles.
How the job runs
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Finishes and options
| Option | Detail |
|---|---|
| Polymer impact bollards | Flex and recover on impact, reducing damage to anchors, floor and vehicle. Need clearance to deflect. |
| Column and rack end guards | Wrap-around or corner protectors for columns and racking uprights where a single post will not fit. |
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
What moves the price in Ellon
Two Ellon jobs with the same number of posts can price quite differently. The usual reasons:
- Steel or polymer bollards and the impact performance needed
- Number of positions and types of guard
- Slab condition and the anchors or foundations it needs
Keeping them working
Persistent strikes in one place often mean the route or turning space needs changing rather than heavier protection. Inspect warehouse bollards regularly as part of routine site checks, and after any reported impact.
If posts in Ellon are later hit or damaged, we can repair or replace them — see bollard repairs.
Warehouse bollards in Ellon: FAQs
Do you install warehouse impact bollards in Ellon?
We cover all of Ellon (AB41) and the rest of Aberdeenshire. We also work in Inverurie, Peterhead and Aberdeen.
Do I need consent for warehouse impact bollards on a public footway in Ellon?
For anything on the public footway in Ellon we check with the roads authority first — Aberdeenshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
How much do warehouse impact bollards cost in Ellon?
In Ellon, typically £175–£1,195 per bollard, supplied and fixed, plus VAT, with a minimum job of £445 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Should we choose steel or polymer warehouse bollards?
Steel suits lighter traffic and sound, thick slabs where cost matters most. Polymer suits busy forklift areas where repeated impacts would destroy anchors and floors. Polymer often costs more to buy but less to keep in service.
Can bollards be fixed to a thin warehouse floor?
Sometimes, using larger base plates, through-bolts or polymer bollards that reduce anchor loads. If the slab is too thin or damaged, a new local foundation may be needed. We check the slab before recommending a fixing.