Scotland · 2 towns
Warehouse and loading-bay bollards in Argyll and Bute
Warehouse bollards for sites across Argyll and Bute: surveyed, quoted in writing and installed by our crews.
Computer-generated imageWarehouse bollards in Argyll and Bute
Across Argyll and Bute, typical sites for warehouse impact bollards include local parades, small industrial units and community buildings. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
Highway and roads authorities for local roads in Argyll and Bute: Argyll and Bute Council.
Choose your town in Argyll and Bute
Guide prices in Argyll and Bute
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£605 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £485–£905 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £785–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; no regional adjustment. Guide only — the fixed price follows a survey.
Highway and planning authorities in Argyll and Bute
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Helensburgh | Argyll and Bute Council | Argyll and Bute Council |
| Dunoon | Argyll and Bute Council | Argyll and Bute Council |
Rules for warehouse impact bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Scotland.
How installation works
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Fix, torque and mark
Bollards and guards are fixed and torqued, then any associated floor markings are applied so drivers can see protected zones.
Warehouse bollards in Argyll and Bute: FAQs
Do you cover all of Argyll and Bute for warehouse impact bollards?
The mainland, yes — Bute, Mull, Islay and the other islands are outside our coverage. including Helensburgh and Dunoon. Enter your postcode in the price calculator to confirm.
How much do warehouse impact bollards cost in Argyll and Bute?
In Argyll and Bute, typically £175–£1,195 per bollard, supplied and fixed, plus VAT, with a minimum job of £445 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Argyll and Bute?
The council is the roads authority for local roads (Argyll and Bute Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
Can bollards be fixed to a thin warehouse floor?
Sometimes, using larger base plates, through-bolts or polymer bollards that reduce anchor loads. If the slab is too thin or damaged, a new local foundation may be needed. We check the slab before recommending a fixing.
How close to a column should a bollard sit?
Close enough that a vehicle cannot reach the column around it, but with enough gap that the bollard does not hit the column when struck. Polymer bollards need more clearance than steel because they deflect. The gap is set from the product data.