Kent · England
Warehouse and loading-bay bollards in Gravesend
Planning warehouse impact bollards in Gravesend? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageGravesend warehouse impact bollards
Across Gravesend, typical sites for warehouse impact bollards include community buildings, high street shopfronts and community car parks. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
Coverage in Gravesend takes in the DA12, DA11 and DA13 postcode districts and nearby places like Shorne, Shorne Ridgeway, Sole Street and Gold Street. We also cover neighbouring Strood (5.7 miles), Dartford (6.8 miles), Rochester (6.9 miles) and Chatham (8 miles) — distances are straight-line.
Gravesend at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Gravesham
- Postcodes
- DA12, DA11 and DA13
- Guide price
- Typically £185–£1,245 per bollard + VAT; minimum job £465
- Survey
- Free, with a fixed written quote
Warehouse impact bollards in Gravesend: common uses
Typical reasons Gravesend sites choose warehouse impact bollards:
- Loading dock doors, shutter guides and dock levellers
- Pedestrian crossings and the ends of walkways
- Sprinkler risers, electrical panels and gas meters
Guide prices for Gravesend
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£635 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£965 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,245 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Gravesend
The highway authority for local roads in Gravesend is Kent County Council; motorways and trunk roads sit with National Highways. Warehouse impact bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Gravesend need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Gravesham before posts go in.
The slab is the foundation, and it decides what can be fixed where. External yard bollards can be root-fixed in concrete foundations, with the usual checks for buried drainage and cables.
- Where impact performance matters, ask for products tested to PAS 13 and match the stated performance to your vehicles.
- Check with the building owner before drilling into slabs with underfloor heating, guidance wires or post-tensioned reinforcement.
From survey to handover
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Fix, torque and mark
Bollards and guards are fixed and torqued, then any associated floor markings are applied so drivers can see protected zones.
Choosing the right spec
| Option | Detail |
|---|---|
| Diameters and heights | Commonly 114–273 mm diameter and around 600–1,200 mm high, chosen for vehicle type and mast or fork height. |
| Door frame protection | Bollards or low barriers either side of dock doors and roller shutters to protect frames and guides. |
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
What moves the price in Gravesend
Two Gravesend jobs with the same number of posts can price quite differently. The usual reasons:
- Steel or polymer bollards and the impact performance needed
- Out-of-hours or phased working around operations
- Number of positions and types of guard
Keeping them working
Inspect warehouse bollards regularly as part of routine site checks, and after any reported impact. Persistent strikes in one place often mean the route or turning space needs changing rather than heavier protection.
If posts in Gravesend are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you install warehouse impact bollards anywhere in Gravesend?
We cover all of Gravesend (DA12, DA11 and DA13) and the rest of Kent. We also work in Strood, Dartford and Rochester.
Do I need consent for warehouse impact bollards on a public footway in Gravesend?
The highway authority for local roads in Gravesend is Kent County Council; motorways and trunk roads sit with National Highways. Warehouse impact bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do warehouse impact bollards cost in Gravesend?
In Gravesend, typically £185–£1,245 per bollard, supplied and fixed, plus VAT, with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What size bollard do we need for forklifts?
That depends on the forklift's weight with load and how fast it travels near the asset, not just the post diameter. Tested products state their impact performance, which can be compared with your fleet. We size from your vehicles at the survey.
Should we choose steel or polymer warehouse bollards?
Steel suits lighter traffic and sound, thick slabs where cost matters most. Polymer suits busy forklift areas where repeated impacts would destroy anchors and floors. Polymer often costs more to buy but less to keep in service.