Kent · England
Access control for automatic bollards in Gravesend
Bollard access control systems supplied and fitted in Gravesend, Kent: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageGravesend bollard access control systems
Bollard access control systems suit plenty of Gravesend sites, high street shopfronts, small industrial units and town-centre squares among them. A good scheme lets authorised vehicles in without delay while safety devices still decide when the bollard may move.
We cover Gravesend's DA12, DA11 and DA13 postcode districts, including places such as Shorne, Shorne Ridgeway, Sole Street and Gold Street. Nearby, we also work in Strood (5.7 miles), Dartford (6.8 miles), Rochester (6.9 miles) and Chatham (8 miles), measured as the crow flies.
Key facts for this area
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Gravesham
- Postcodes
- DA12, DA11 and DA13
- Guide price
- Typically £635–£12,695 per entrance + VAT
- Survey
- Free, with a fixed written quote
Gravesend: typical access control prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £635–£5,695 + VAT | Remote fobs or a standalone keypad |
| Upgraded | £4,245–£9,345 + VAT | GSM intercom with keypad on a post |
| Premium | £7,895–£12,695 + VAT | ANPR camera, software and integration |
Per entrance, controls supplied, installed and commissioned; +6% for South East. Guide only — the fixed price follows a survey.
Where bollard access control systems go in around Gravesend
Common uses in a place like Gravesend:
- Visitor and contractor access managed from a reception or remotely
- Pedestrianised zones with permitted delivery and blue badge access
- Sites needing a record of vehicle entries and exits
Before we dig in Gravesend
Kent County Council is the highway authority covering Gravesend's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Gravesend need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Gravesham before posts go in.
Where existing bollards are being upgraded, old cables and ducts are tested before being reused. Ducts between the controller, readers and cameras usually cross footways and verges where services run, so routes are traced before digging and draw pits are placed where runs change direction.
- Have power and data installations certified by a qualified electrician to BS 7671.
- If you use ANPR or video, check your obligations for handling personal data, including signage, a privacy notice and how long records are kept.
From survey to handover
Plan positions
Readers, cameras and intercoms are placed so drivers stop well before the bollard, with queueing space off the public road where possible.
Wire and connect
A qualified electrician installs power, and devices are connected to the bollard controller and to any network or building system.
Hand over
You are shown how to add and remove users, read logs and use the emergency override. Credentials and settings are recorded.
Options to consider
| Option | Detail |
|---|---|
| Remote handsets and app control | Handsets for small user groups; app control for sites that want to add and remove users from a phone. |
| Fob, card and tag readers | Proximity readers on a pedestal at window height. Lost fobs can be deleted individually without changing anyone else's access. |
| Exit loops and timers | Loops lower the bollard for vehicles leaving; timers hold it down during set windows. |
What affects the quote
When we price bollard access control systems in Gravesend, these make the biggest difference:
- Integration with existing access control or fire systems
- Pedestals, lighting for cameras and signage
- Network or GSM connectivity at the entrance
After installation
If the bollard opens for people who should not have access, the user list is usually the cause rather than the hardware. Test exit loops and emergency overrides at each service visit.
For damaged or loose posts in Gravesend, repairs and replacements are priced in writing first.
Bollard access control in Gravesend: FAQs
Can you install bollard access control systems anywhere in Gravesend?
We cover all of Gravesend (DA12, DA11 and DA13) and the rest of Kent. We also work in Strood, Dartford and Rochester.
Who gives permission for bollards on the pavement in Gravesend?
In Gravesend, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do bollard access control systems cost in Gravesend?
In Gravesend, typically £635–£12,695 per entrance, controls supplied, installed and commissioned, plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can new access control be added to our existing bollards?
Often, yes, if the bollard controller can accept the new devices. We check the existing controller and cabling first. Very old controllers sometimes need replacing at the same time.
How do visitors and delivery drivers get through?
Usually by intercom to reception or a phone, by a temporary code, or by a timed delivery window. Some systems issue time-limited access to a visitor's number plate. The choice depends on how many visitors arrive and who is there to manage them.