Kent · England
Shallow-mount security bollard installation in Gravesend
Shallow-mount bollards supplied and fitted in Gravesend, Kent: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageGravesend shallow-mount bollards
Whether it's filling-station forecourts, high street shopfronts and schools, shallow-mount bollards in Gravesend are planned around who needs to get through and who doesn't. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
We cover Gravesend's DA12, DA11 and DA13 postcode districts, including places such as Shorne, Shorne Ridgeway, Sole Street and Gold Street. Jobs in Gravesend can be combined with work in Strood (5.7 miles), Dartford (6.8 miles), Rochester (6.9 miles) and Chatham (8 miles) (straight-line distances).
Gravesend at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Gravesham
- Postcodes
- DA12, DA11 and DA13
- Guide price
- Typically £2,095–£9,545 per bollard + VAT; minimum job £5,295
- Survey
- Free, with a fixed written quote
Guide prices for Gravesend
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,095–£5,245 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,345–£7,445 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,545–£9,545 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Where shallow-mount bollards go in around Gravesend
Typical reasons Gravesend sites choose shallow-mount bollards:
- Lines that must cross over shallow drainage or ducts
- Footways with dense utility runs just below the surface
- Listed or historic streets where deep digging is unwelcome
Before we dig in Gravesend
The highway authority for local roads in Gravesend is Kent County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Gravesend is listed or inside a conservation area, check with the local planning authority (the council for Gravesham) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Shallow does not mean simple. The trench has to sit over services with enough cover to protect them, but the frame also needs a firm, consistent bearing; soft spots, old backfill around pipe trenches and voids under paving can all need treating first.
- Get written confirmation from a structural engineer before installing on slabs, decks, basements or over voids.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
What happens on site
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Finishes and options
| Option | Detail |
|---|---|
| Removable posts within a run | Some systems include removable or retractable positions for maintenance or emergency access. Check how these affect the rating. |
| Rated planters and street furniture | Benches, planters and cycle stands built around a tested shallow core, used where a line of posts would look out of place. |
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
What moves the price in Gravesend
Our South East guide prices are a starting point; the survey in Gravesend firms them up. What tends to move them:
- Amount of hand digging needed around live services
- Structural engineering checks on slabs or decks
- Lifting, storing and relaying natural stone paving
Keeping them working
Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands. If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation.
For damaged or loose posts in Gravesend, repairs and replacements are priced in writing first.
Questions about shallow-mount bollards in Gravesend
Can you install shallow-mount bollards anywhere in Gravesend?
We cover all of Gravesend (DA12, DA11 and DA13) and the rest of Kent. We also work in Strood, Dartford and Rochester.
Do I need consent for shallow-mount bollards on a public footway in Gravesend?
In Gravesend, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for shallow-mount bollards in Gravesend?
In Gravesend, typically £2,095–£9,545 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,295 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.