London · England
Warehouse and loading-bay bollards in Greenwich
Warehouse impact bollards for sites across Greenwich and the rest of London, from the first measurement to the last relaid paving block.
Computer-generated imageGreenwich warehouse impact bollards
In the borough of Greenwich, warehouse impact bollards tend to go in at office entrances, station forecourts and shopping parades. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
Coverage in Greenwich takes in the SE3, SE7, SE18, SE9, SE10 and SE2 postcode districts and nearby places like Woolwich and Eltham. Jobs in Greenwich can be combined with work in Lewisham (2.8 miles), Bexley (4.2 miles), Newham (4.5 miles) and Tower Hamlets (4.9 miles) (straight-line distances).
Local details
- Area
- London, England
- Highway authority
- Greenwich Council (local roads)
- Planning authority
- Greenwich Council
- Postcodes
- SE3, SE7, SE18, SE9, SE10, SE2 and SE28
- Guide price
- Typically £205–£1,395 per bollard + VAT; minimum job £505
- Survey
- Free, with a fixed written quote
- Nearby
- Lewisham (2.8 mi), Bexley (4.2 mi), Newham (4.5 mi), Tower Hamlets (4.9 mi)
What Greenwich sites use warehouse impact bollards for
Common uses in a place like Greenwich:
- Building columns in forklift aisles and turning areas
- Fire exit doors and emergency routes
- Racking ends and corners in busy aisles
Greenwich: typical warehouse impact bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£695 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £555–£1,045 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,395 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +15% for London. Guide only — the fixed price follows a survey.
Before we dig in Greenwich
In Greenwich, work on adopted pavements and verges needs consent from Greenwich Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Greenwich Council) first — we flag this at survey.
Warehouse floors vary from thick reinforced slabs to thin toppings over older concrete, and some contain underfloor heating, ducting or wire-guidance systems for automated trucks that must not be cut. Where a slab is too thin or poor, the options include through-bolting, a larger base plate to spread load, a polymer bollard that reduces anchor forces, or breaking out and casting a new local foundation.
- Use your workplace transport risk assessment to decide where protection is needed, in line with HSE guidance on workplace transport.
- Where impact performance matters, ask for products tested to PAS 13 and match the stated performance to your vehicles.
How the job runs
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Fix, torque and mark
Bollards and guards are fixed and torqued, then any associated floor markings are applied so drivers can see protected zones.
Specification choices
| Option | Detail |
|---|---|
| Diameters and heights | Commonly 114–273 mm diameter and around 600–1,200 mm high, chosen for vehicle type and mast or fork height. |
| Column and rack end guards | Wrap-around or corner protectors for columns and racking uprights where a single post will not fit. |
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
What affects the quote
When we price warehouse impact bollards in Greenwich, these make the biggest difference:
- Slab condition and the anchors or foundations it needs
- Steel or polymer bollards and the impact performance needed
- Removal of damaged existing protection
After installation
Persistent strikes in one place often mean the route or turning space needs changing rather than heavier protection. Inspect warehouse bollards regularly as part of routine site checks, and after any reported impact.
For damaged or loose posts in Greenwich, repairs and replacements are priced in writing first.
Questions about warehouse impact bollards in Greenwich
Can you install warehouse impact bollards anywhere in Greenwich?
We cover all of Greenwich (SE3, SE7, SE18, SE9, SE10 and SE2) and the rest of London. We also work in Lewisham, Bexley and Newham.
Who gives permission for bollards on the pavement in Greenwich?
In Greenwich, work on adopted pavements and verges needs consent from Greenwich Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for warehouse impact bollards in Greenwich?
In Greenwich, typically £205–£1,395 per bollard, supplied and fixed, plus VAT, with a minimum job of £505 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Can bollards be fixed to a thin warehouse floor?
Sometimes, using larger base plates, through-bolts or polymer bollards that reduce anchor loads. If the slab is too thin or damaged, a new local foundation may be needed. We check the slab before recommending a fixing.
What size bollard do we need for forklifts?
That depends on the forklift's weight with load and how fast it travels near the asset, not just the post diameter. Tested products state their impact performance, which can be compared with your fleet. We size from your vehicles at the survey.
Warehouse bollards near Greenwich
- Lewisham (2.8 mi)
- Bexley (4.2 mi)
- Newham (4.5 mi)
- Tower Hamlets (4.9 mi)
- Southwark (5.1 mi)
- Bromley (7 mi)