London · England
Automatic rising bollard installation in Greenwich
Automatic bollards for sites across Greenwich and the rest of London, from the first measurement to the last relaid paving block.
Computer-generated imageAutomatic bollards in Greenwich
In the borough of Greenwich, automatic bollards tend to go in at places of worship, shopping parades and station forecourts. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
We cover Greenwich's SE3, SE7, SE18, SE9, SE10 and SE2 postcode districts, including places such as Woolwich and Eltham. Jobs in Greenwich can be combined with work in Lewisham (2.8 miles), Bexley (4.2 miles), Newham (4.5 miles) and Tower Hamlets (4.9 miles) (straight-line distances).
Local details
- Area
- London, England
- Highway authority
- Greenwich Council (local roads)
- Planning authority
- Greenwich Council
- Postcodes
- SE3, SE7, SE18, SE9, SE10, SE2 and SE28
- Guide price
- Typically £3,445–£17,295 per bollard + VAT
- Survey
- Free, with a fixed written quote
- Nearby
- Lewisham (2.8 mi), Bexley (4.2 mi), Newham (4.5 mi), Tower Hamlets (4.9 mi)
Where automatic bollards go in around Greenwich
Around Greenwich, automatic bollards usually solve one of these:
- Business parks and campus roads with controlled vehicle access
- Secure loading yards where rated automatic posts are specified
- Entrances where a gate would block pedestrian desire lines
Greenwich: typical automatic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £3,445–£9,245 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £7,595–£13,395 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £11,695–£17,295 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; +15% for London. Guide only — the fixed price follows a survey.
Permissions and groundwork in Greenwich
In Greenwich, work on adopted pavements and verges needs consent from Greenwich Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Greenwich Council) first — we flag this at survey.
Without drainage, rainwater and silt collect in the cassette, corrode the mechanism and can freeze around the post in winter. Loops are cut into a sound surface: badly cracked tarmac or block paving may need resurfacing first, because loops in broken surfaces fail early.
- Have the electrical installation carried out and certified by a qualified electrician to BS 7671.
- On public highway, rising bollards normally need highway authority approval, with signs and signals to their requirements.
How the job runs
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Choosing the right spec
| Option | Detail |
|---|---|
| Fail-safe behaviour | Configured to lower or stay raised on power loss, with a manual release, depending on whether access or security takes priority. |
| Unrated or crash-rated | Unrated units control traffic; rated units are tested to IWA 14-1, ISO 22343-1 or PAS 68 for security entrances, with deeper, heavier foundations. |
| Hydraulic drive | Integral or remote power pack. Suits high-frequency entrances and heavier rated units, with periodic checks on fluid, seals and hoses. |
Pricing automatic bollards in Greenwich
Two Greenwich jobs with the same number of posts can price quite differently. The usual reasons:
- Traffic management during installation on live roads
- Access control devices, traffic lights and signage
- Length of duct runs, drainage connections and power supply distance
After installation
Between visits, site staff should keep the head clear of grit and leaves, report slow or noisy movement early and never override safety devices to keep an entrance open. Typical visits clean and inspect the cassette and drain, check hydraulic fluid or gearbox condition, test loops, photocells, lights and the manual release, and read the controller's fault log.
We can also service, repair or replace existing posts anywhere in Greenwich.
Questions about automatic bollards in Greenwich
Which parts of Greenwich do you cover for automatic bollards?
We cover all of Greenwich (SE3, SE7, SE18, SE9, SE10 and SE2) and the rest of London. We also work in Lewisham, Bexley and Newham.
Who gives permission for bollards on the pavement in Greenwich?
In Greenwich, work on adopted pavements and verges needs consent from Greenwich Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
How much do automatic bollards cost in Greenwich?
In Greenwich, typically £3,445–£17,295 per bollard, installed with controls, loops and commissioning, plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
What happens in a power cut?
That depends on how the system is configured. Traffic bollards are often set to lower or can be lowered with a manual release, so vehicles are not trapped. Security bollards may be set to stay raised, with a procedure for staff to follow.
Can rising bollards be installed on a public road?
Only with the highway authority's approval, and they will set requirements for signs, signals and operation. On private land the decision is yours, but the same safety principles apply.
Automatic bollards in nearby towns
- Lewisham (2.8 mi)
- Bexley (4.2 mi)
- Newham (4.5 mi)
- Tower Hamlets (4.9 mi)
- Southwark (5.1 mi)
- Bromley (7 mi)