London · England
Warehouse and loading-bay bollards in Kensington and Chelsea
Warehouse impact bollards for sites across Kensington and Chelsea and the rest of London, from the first measurement to the last relaid paving block.
Computer-generated imageAbout warehouse impact bollards in Kensington and Chelsea
From shopping parades, places of worship and hospital approaches, Kensington and Chelsea has plenty of places where warehouse impact bollards earn their keep. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
Coverage in Kensington and Chelsea takes in the W8, W11, SW5, SW7, W10 and SW10 postcode districts. Nearby, we also work in Hammersmith and Fulham (1.4 miles), Westminster (2.1 miles), Camden (3.2 miles) and Wandsworth (3.6 miles), measured as the crow flies.
Key facts for this area
- Area
- London, England
- Highway authority
- Kensington and Chelsea Council (local roads)
- Planning authority
- Kensington and Chelsea Council
- Postcodes
- W8, W11, SW5, SW7, W10, SW10 and SW3
- Guide price
- Typically £205–£1,395 per bollard + VAT; minimum job £505
- Survey
- Free, with a fixed written quote
- Nearby
- Hammersmith and Fulham (1.4 mi), Westminster (2.1 mi), Camden (3.2 mi), Wandsworth (3.6 mi)
Where warehouse impact bollards go in around Kensington and Chelsea
Around Kensington and Chelsea, warehouse impact bollards usually solve one of these:
- Pedestrian crossings and the ends of walkways
- Fire exit doors and emergency routes
- Sprinkler risers, electrical panels and gas meters
Kensington and Chelsea: typical warehouse impact bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£695 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £555–£1,045 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,395 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +15% for London. Guide only — the fixed price follows a survey.
What we check first in Kensington and Chelsea
In Kensington and Chelsea, work on adopted pavements and verges needs consent from Kensington and Chelsea Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Kensington and Chelsea Council) first — we flag this at survey.
External yard bollards can be root-fixed in concrete foundations, with the usual checks for buried drainage and cables. Anchors need enough edge distance from slab joints and cracks or they will split the concrete on first impact.
- Check with the building owner before drilling into slabs with underfloor heating, guidance wires or post-tensioned reinforcement.
- Keep fire exits, escape routes and fire equipment accessible; bollards must not narrow escape routes below their required width.
What happens on site
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Fix, torque and mark
Bollards and guards are fixed and torqued, then any associated floor markings are applied so drivers can see protected zones.
Finishes and options
| Option | Detail |
|---|---|
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
| Steel bollards | Yellow-coated steel tube on a base plate, often concrete-filled. Robust and economical, but they pass impact loads straight into the slab. |
| Polymer impact bollards | Flex and recover on impact, reducing damage to anchors, floor and vehicle. Need clearance to deflect. |
What moves the price in Kensington and Chelsea
When we price warehouse impact bollards in Kensington and Chelsea, these make the biggest difference:
- Steel or polymer bollards and the impact performance needed
- Number of positions and types of guard
- Removal of damaged existing protection
After installation
On steel bollards look for bending, cracked welds, loose or sheared anchors and cracked concrete around the base plate. Persistent strikes in one place often mean the route or turning space needs changing rather than heavier protection.
For damaged or loose posts in Kensington and Chelsea, repairs and replacements are priced in writing first.
Warehouse bollards in Kensington and Chelsea: FAQs
Can you install warehouse impact bollards anywhere in Kensington and Chelsea?
We cover all of Kensington and Chelsea (W8, W11, SW5, SW7, W10 and SW10) and the rest of London. We also work in Hammersmith and Fulham, Westminster and Camden.
Who gives permission for bollards on the pavement in Kensington and Chelsea?
Kensington and Chelsea Council is the highway authority covering Kensington and Chelsea's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do warehouse impact bollards cost in Kensington and Chelsea?
In Kensington and Chelsea, typically £205–£1,395 per bollard, supplied and fixed, plus VAT, with a minimum job of £505 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
What is PAS 13?
PAS 13 is a code of practice for safety barriers used in workplaces, including a method for impact testing them. Products tested to it state how much impact they can take. It helps compare products on performance rather than appearance.
What size bollard do we need for forklifts?
That depends on the forklift's weight with load and how fast it travels near the asset, not just the post diameter. Tested products state their impact performance, which can be compared with your fleet. We size from your vehicles at the survey.
Warehouse bollards in nearby towns
- Hammersmith and Fulham (1.4 mi)
- Westminster (2.1 mi)
- Camden (3.2 mi)
- Wandsworth (3.6 mi)
- Lambeth (4.5 mi)
- City of London (4.7 mi)