Surrey · England
Warehouse and loading-bay bollards in Camberley
Warehouse impact bollards supplied and fitted in Camberley, Surrey: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageCamberley warehouse impact bollards
From small industrial units, high street shopfronts and community buildings, Camberley has plenty of places where warehouse impact bollards earn their keep. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
Coverage in Camberley takes in the GU15, GU16, GU19, GU18, GU20 and GU24 postcode districts and nearby places like Frimley, Mytchett, Deepcut and Bagshot. Nearby, we also work in Sandhurst (2 miles), Farnborough (3 miles), Crowthorne (3.1 miles) and Yateley (3.8 miles), measured as the crow flies. It sits roughly 13 miles from Reading as the crow flies.
Key facts for this area
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Surrey Heath
- Postcodes
- GU15, GU16, GU19, GU18, GU20 and GU24
- Guide price
- Typically £185–£1,245 per bollard + VAT; minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Sandhurst (2 mi), Farnborough (3 mi), Crowthorne (3.1 mi), Yateley (3.8 mi)
Guide prices for Camberley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£635 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£965 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,245 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +6% for South East. Guide only — the fixed price follows a survey.
Warehouse impact bollards in Camberley: common uses
Around Camberley, warehouse impact bollards usually solve one of these:
- Building columns in forklift aisles and turning areas
- Racking ends and corners in busy aisles
- Fire exit doors and emergency routes
Permissions and groundwork in Camberley
Surrey County Council is the highway authority covering Camberley's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Surrey Heath) first — we flag this at survey.
The slab is the foundation, and it decides what can be fixed where. Anchors need enough edge distance from slab joints and cracks or they will split the concrete on first impact.
- Check with the building owner before drilling into slabs with underfloor heating, guidance wires or post-tensioned reinforcement.
- Keep fire exits, escape routes and fire equipment accessible; bollards must not narrow escape routes below their required width.
Installation, step by step
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Plan around operations
Work is phased by aisle or zone, or done out of hours, with each area barriered off while drilling. Dust is controlled with extraction where products are stored nearby.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Finishes and options
| Option | Detail |
|---|---|
| Door frame protection | Bollards or low barriers either side of dock doors and roller shutters to protect frames and guides. |
| Column and rack end guards | Wrap-around or corner protectors for columns and racking uprights where a single post will not fit. |
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
What moves the price in Camberley
Two Camberley jobs with the same number of posts can price quite differently. The usual reasons:
- Removal of damaged existing protection
- Steel or polymer bollards and the impact performance needed
- Floor marking and associated signage
Looking after them
Inspect warehouse bollards regularly as part of routine site checks, and after any reported impact. Polymer bollards should return to their original shape; one that stays deformed or has split needs replacing.
We can also service, repair or replace existing posts anywhere in Camberley.
Warehouse bollards in Camberley: FAQs
Which parts of Camberley do you cover for warehouse impact bollards?
We cover all of Camberley (GU15, GU16, GU19, GU18, GU20 and GU24) and the rest of Surrey. We also work in Sandhurst, Farnborough and Crowthorne.
Who gives permission for bollards on the pavement in Camberley?
In Camberley, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for warehouse impact bollards in Camberley?
In Camberley, typically £185–£1,245 per bollard, supplied and fixed, plus VAT, with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can bollards be fixed to a thin warehouse floor?
Sometimes, using larger base plates, through-bolts or polymer bollards that reduce anchor loads. If the slab is too thin or damaged, a new local foundation may be needed. We check the slab before recommending a fixing.
What is PAS 13?
PAS 13 is a code of practice for safety barriers used in workplaces, including a method for impact testing them. Products tested to it state how much impact they can take. It helps compare products on performance rather than appearance.
Warehouse bollards near Camberley
- Sandhurst (2 mi)
- Farnborough (3 mi)
- Crowthorne (3.1 mi)
- Yateley (3.8 mi)
- Bracknell (5.3 mi)
- Fleet (5.4 mi)