Surrey · England
Warehouse and loading-bay bollards in Ewell
Warehouse impact bollards for sites across Ewell and the rest of Surrey, from the first measurement to the last relaid paving block.
Computer-generated imageEwell warehouse impact bollards
Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses. In Ewell, that tends to mean sites such as schools, community car parks and small industrial units.
Coverage in Ewell takes in the KT17 postcode district and nearby places like Epsom Downs and North Looe. We also cover neighbouring Epsom (1.6 miles), Kingston upon Thames (2.5 miles), Banstead (2.6 miles) and Sutton (3.3 miles) — distances are straight-line. Ewell is about 32 miles from Reading.
Key facts for this area
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Epsom and Ewell
- Postcodes
- KT17
- Guide price
- Typically £185–£1,245 per bollard + VAT; minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Epsom (1.6 mi), Kingston upon Thames (2.5 mi), Banstead (2.6 mi), Sutton (3.3 mi)
What Ewell sites use warehouse impact bollards for
Typical reasons Ewell sites choose warehouse impact bollards:
- Loading dock doors, shutter guides and dock levellers
- Building columns in forklift aisles and turning areas
- Charging stations for forklifts and pallet trucks
What warehouse impact bollards cost in Ewell
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£635 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£965 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,245 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Ewell
Surrey County Council is the highway authority covering Ewell's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Epsom and Ewell) first — we flag this at survey.
Where a slab is too thin or poor, the options include through-bolting, a larger base plate to spread load, a polymer bollard that reduces anchor forces, or breaking out and casting a new local foundation. The slab is the foundation, and it decides what can be fixed where.
- Check with the building owner before drilling into slabs with underfloor heating, guidance wires or post-tensioned reinforcement.
- Where impact performance matters, ask for products tested to PAS 13 and match the stated performance to your vehicles.
What happens on site
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Fix, torque and mark
Bollards and guards are fixed and torqued, then any associated floor markings are applied so drivers can see protected zones.
Specification choices
| Option | Detail |
|---|---|
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
| Door frame protection | Bollards or low barriers either side of dock doors and roller shutters to protect frames and guides. |
| Diameters and heights | Commonly 114–273 mm diameter and around 600–1,200 mm high, chosen for vehicle type and mast or fork height. |
Pricing warehouse impact bollards in Ewell
Two Ewell jobs with the same number of posts can price quite differently. The usual reasons:
- Slab condition and the anchors or foundations it needs
- Out-of-hours or phased working around operations
- Number of positions and types of guard
Looking after them
On steel bollards look for bending, cracked welds, loose or sheared anchors and cracked concrete around the base plate. Repaint or recoat steel posts when the yellow is worn, because faded protection is easier to miss.
For damaged or loose posts in Ewell, repairs and replacements are priced in writing first.
Warehouse bollards in Ewell: FAQs
Can you install warehouse impact bollards anywhere in Ewell?
We cover all of Ewell (KT17) and the rest of Surrey. We also work in Epsom, Kingston upon Thames and Banstead.
Do I need consent for warehouse impact bollards on a public footway in Ewell?
The highway authority for local roads in Ewell is Surrey County Council; motorways and trunk roads sit with National Highways. Warehouse impact bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for warehouse impact bollards in Ewell?
In Ewell, typically £185–£1,245 per bollard, supplied and fixed, plus VAT, with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can bollards be fixed to a thin warehouse floor?
Sometimes, using larger base plates, through-bolts or polymer bollards that reduce anchor loads. If the slab is too thin or damaged, a new local foundation may be needed. We check the slab before recommending a fixing.
Can you install while the warehouse is operating?
Usually yes, by working zone by zone with each area barriered off, or by working nights or weekends. Drilling dust is controlled near stored goods. We agree the phasing with your site manager.
Warehouse bollards near Ewell
- Epsom (1.6 mi)
- Kingston upon Thames (2.5 mi)
- Banstead (2.6 mi)
- Sutton (3.3 mi)
- Merton (5 mi)
- Leatherhead (5.2 mi)