Swansea · Wales
Automatic bollard repairs in Clydach
Auto bollard repairs for sites in Clydach and the rest of Swansea, by crews working under our management.
Computer-generated imageAuto bollard repairs in Clydach
We carry out auto bollard repairs throughout Clydach, typically for high street shopfronts, small industrial units and schools. Repairs start with finding the cause, then making the bollard safe and replacing or adjusting the failed part.
Coverage in Clydach takes in the SA6 postcode district and nearby places like Craig-cefn-parc and Rhyd-y-gwin. We also cover neighbouring Neath (4.3 miles), Swansea (4.7 miles), Gorseinon (6.1 miles) and Port Talbot (7.7 miles) — distances are straight-line. Clydach is about 5 miles from Swansea.
Key facts for this area
- Area
- Swansea, Wales
- Highway authority
- Swansea Council (local roads)
- Planning authority
- Swansea Council
- Postcodes
- SA6
- Guide price
- Typically £145–£2,445 per repair + VAT
- Survey
- Paid visit, price confirmed in writing first
- Nearby
- Neath (4.3 mi), Swansea (4.7 mi), Gorseinon (6.1 mi), Port Talbot (7.7 mi)
Clydach: typical automatic bollard repair prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £145–£1,095 + VAT | Diagnostic visit and minor fault fix |
| Upgraded | £825–£1,795 + VAT | Component repair: loop, controller or photocell |
| Premium | £1,495–£2,445 + VAT | Major part: hydraulic unit, ram or bollard head |
Per repair, from a diagnostic visit to a replacement hydraulic unit or head; -3% for Wales. Guide only — the visit price is confirmed in writing first.
Common reasons for auto bollard repairs in Clydach
Typical reasons for auto bollard repairs in Clydach:
- Hydraulic oil leaks around the head or pit
- Bollards stuck in the raised or lowered position
- Flooded pits after heavy rain
What we check first in Clydach
Local roads and pavements in Clydach are the responsibility of Swansea Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
If your site in Clydach is listed or inside a conservation area, check with the local planning authority (Swansea Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Resurfacing contractors often cut through loops and ducts without realising they are there, so it is worth pointing them out before any roadworks. Pits flood when drains silt up, soakaways fail or pipes collapse, and the repair may involve jetting or relaying a drain as well as replacing water-damaged parts.
- After an incident where a bollard struck a vehicle or person, revisit the risk assessment and safety settings before returning it to use.
- Do not keep a bollard in service with faulty or bypassed safety devices; make it safe and lock it down or out of use until repaired.
How the job runs
Agree the visit price
We confirm the cost of the diagnostic and repair visit in writing. Nothing is done until you have agreed it.
Diagnose the cause
Fault logs, loops, drive, electrics and pit are checked in turn to find the underlying cause rather than just the symptom.
Test and report
After the repair, every safety device and access input is tested with vehicles, and you receive a written report of the fault, cause and work done.
Options to consider
| Option | Detail |
|---|---|
| Make safe | Locking the bollard down or securing it up, with cones and signs, so the entrance is safe while a repair is arranged. |
| Electro-mechanical repairs | Motors, gearboxes, couplings, position sensors and limit switches. |
| Heads and covers | Replacement heads, covers, reflective bands and light rings after impact damage. |
What moves the price in Clydach
Two Clydach jobs with the same number of posts can price quite differently. The usual reasons:
- Loop replacement and surface repairs
- Hydraulic or electro-mechanical drive
- Nature of the fault and time needed to diagnose it
Keeping them working
After a repair, consider a planned maintenance arrangement if the bollard has no service history. Between visits, keep the bollard head clear, report changes in speed or sound promptly and keep a simple log of faults with times and dates, which speeds diagnosis.
We can also service, repair or replace existing posts anywhere in Clydach.
Common questions
Do you carry out auto bollard repairs in Clydach?
We cover all of Clydach (SA6) and the rest of Swansea. We also work in Neath, Swansea and Gorseinon.
Who gives permission for bollards on the pavement in Clydach?
Local roads and pavements in Clydach are the responsibility of Swansea Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
What's a typical price for auto bollard repairs in Clydach?
In Clydach, typically £145–£2,445 per repair, from a diagnostic visit to a replacement hydraulic unit or head, plus VAT, using our Wales guide prices. We confirm the visit price in writing before attending.
Why does our bollard rise and fall by itself?
Usually because a loop or its detector is faulty, or an access device is sending repeated signals. Damaged road surfaces and water in loop cuts are common causes. Diagnosis checks the loops first.
Our bollard rose under a car: what happens next?
Take it out of service and keep it lowered or secured. The safety loops, photocells and settings are checked to find out why it rose, and the damage is assessed. It should not return to use until the cause is fixed and the risk assessment reviewed.
Auto bollard repairs near Clydach
- Neath (4.3 mi)
- Swansea (4.7 mi)
- Gorseinon (6.1 mi)
- Port Talbot (7.7 mi)
- Ystalyfera (7.7 mi)
- Ammanford (8.5 mi)