Swansea · Wales
Removable bollard installation in Clydach
Local installation of removable bollards in Clydach — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageRemovable bollards in Clydach
Removable bollards suit plenty of Clydach sites, community buildings, high street shopfronts and schools among them. Removable bollards are used where vehicles need occasional rather than daily access.
Coverage in Clydach takes in the SA6 postcode district and nearby places like Craig-cefn-parc and Rhyd-y-gwin. We also cover neighbouring Neath (4.3 miles), Swansea (4.7 miles), Gorseinon (6.1 miles) and Port Talbot (7.7 miles) — distances are straight-line. It sits roughly 5 miles from Swansea as the crow flies.
Clydach at a glance
- Area
- Swansea, Wales
- Highway authority
- Swansea Council (local roads)
- Planning authority
- Swansea Council
- Postcodes
- SA6
- Guide price
- Typically £235–£815 per bollard + VAT (£275–£975 inc VAT for homes); minimum job £575
- Survey
- Free, with a fixed written quote
- Nearby
- Neath (4.3 mi), Swansea (4.7 mi), Gorseinon (6.1 mi), Port Talbot (7.7 mi)
Removable bollards in Clydach: common uses
Common uses in a place like Clydach:
- School gates closed during drop-off and pick-up
- Maintenance tracks through parks and open spaces
- Driveways and private parking bays
Clydach: typical removable bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £235–£485 + VAT · £275–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £415–£655 + VAT · £495–£785 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £585–£815 + VAT · £695–£975 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Before we dig in Clydach
In Clydach the highway authority for local roads is Swansea Council. We confirm whether the ground is adopted highway before quoting, because removable bollards on a public footway need its agreement first.
Many private-land installations in Clydach need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Swansea Council before posts go in.
The base sits on free-draining stone or connects to a drainage route, so rainwater does not stand in the socket and freeze around the post in winter. The critical details are level and drainage.
- Keep a clear route of typically at least 1,000–1,200 mm between posts on pedestrian routes, and check against Inclusive Mobility guidance.
- Fit reflective or contrasting bands near the top so posts are visible when in place.
How the job runs
Set the socket flush
The socket is set in concrete with its rim exactly at finished surface level and to the fall of the ground, so the lid sits flat and nothing catches on it.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Specification choices
| Option | Detail |
|---|---|
| Locking type | Triangular or square key, padlock, or integral keyed cylinder. Keyed-alike locks let one key open every post on a site. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
What affects the quote
When we price removable bollards in Clydach, these make the biggest difference:
- Number of posts and sockets
- Post material: steel, stainless or aluminium
- Drainage at the socket base
Looking after them
Keep spare keys somewhere sensible, because lost keys are a common reason for a post being cut out. Check the lid springs and hinges.
If posts in Clydach are later hit or damaged, we can repair or replace them — see bollard repairs.
Removable bollards in Clydach: FAQs
Which parts of Clydach do you cover for removable bollards?
We cover all of Clydach (SA6) and the rest of Swansea. We also work in Neath, Swansea and Gorseinon.
Who gives permission for bollards on the pavement in Clydach?
Local roads and pavements in Clydach are the responsibility of Swansea Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
What's a typical price for removable bollards in Clydach?
In Clydach, typically £235–£815 per bollard with ground socket, supplied and installed, plus VAT (£275–£975 including VAT for homeowners), with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Can removable bollards be installed on block paving?
Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.
How heavy is a removable bollard to lift?
It depends on material and size; a slim aluminium post is easy to lift, while a large concrete-filled steel post is not designed for daily handling. If the post will come out every day, say so at the survey and we will suggest something lighter with a handle.
Removable bollards in nearby towns
- Neath (4.3 mi)
- Swansea (4.7 mi)
- Gorseinon (6.1 mi)
- Port Talbot (7.7 mi)
- Ystalyfera (7.7 mi)
- Ammanford (8.5 mi)