Swansea · Wales
Crash-rated bollard installation in Clydach
Planning crash-rated bollards in Clydach? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout crash-rated bollards in Clydach
Whether it's filling-station forecourts, schools and small industrial units, crash-rated bollards in Clydach are planned around who needs to get through and who doesn't. The rating only holds when the bollard is installed to the same foundation design that was tested.
We cover Clydach's SA6 postcode district, including places such as Craig-cefn-parc and Rhyd-y-gwin. Jobs in Clydach can be combined with work in Neath (4.3 miles), Swansea (4.7 miles), Gorseinon (6.1 miles) and Port Talbot (7.7 miles) (straight-line distances). Swansea is around 5 miles away.
Clydach at a glance
- Area
- Swansea, Wales
- Highway authority
- Swansea Council (local roads)
- Planning authority
- Swansea Council
- Postcodes
- SA6
- Guide price
- Typically £1,945–£9,695 per bollard + VAT; minimum job £3,895
- Survey
- Free, with a fixed written quote
- Nearby
- Neath (4.3 mi), Swansea (4.7 mi), Gorseinon (6.1 mi), Port Talbot (7.7 mi)
What crash-rated bollards cost in Clydach
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£5,195 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,245–£7,545 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,595–£9,695 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; -3% for Wales. Guide only — the fixed price follows a survey.
Crash-rated bollards in Clydach: common uses
Around Clydach, crash-rated bollards usually solve one of these:
- Data centres, utilities and critical infrastructure perimeters
- Stadiums, arenas and event venues with predictable crowd flows
- Glazed frontages on corporate and public buildings
Before we dig in Clydach
Before digging near the kerb in Clydach we establish who owns the ground: adopted footways are Swansea Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
Many private-land installations in Clydach need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Swansea Council before posts go in.
Rated foundations are large, and excavation is often where projects run into trouble. Utility records, radar scanning and hand-dug trial holes come before any machine work, and service diversions can take longer than the bollard installation itself.
- Confirm who owns the land: works on public highway usually need the highway authority's agreement, and permanent street furniture there may need a licence.
- Balance the gaps: narrow enough to stop a vehicle, typically no more than about 1,200 mm, but wide enough for wheelchair users and buggies — check against Inclusive Mobility guidance.
Installation, step by step
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Specification choices
| Option | Detail |
|---|---|
| Heights and diameters | Exposed heights are commonly around 800 to 1,000 mm, with core diameters varying by model and rating. Larger diameters are not always needed to achieve a given rating. |
| Rated removable or automatic posts | Where an entrance must open for deliveries or emergency vehicles, rated removable, retractable or automatic models are available. Check that the rating stated is for the exact model and position you are buying. |
| Decorative covers | Stainless steel, cast or polymer sleeves can be fitted over the steel core to suit a streetscape. Use covers supplied or approved by the manufacturer so the tested product is not altered. |
What moves the price in Clydach
Two Clydach jobs with the same number of posts can price quite differently. The usual reasons:
- The rating required and the product range that achieves it
- Depth and volume of excavation, reinforcement and concrete
- Covers, finishes and any integrated lighting
Keeping them working
Keep inspection records with the original test certificate so the line's condition can be shown to insurers or a security adviser. Look for cracked surfacing at the base, movement, damaged covers and faded bands.
We can also service, repair or replace existing posts anywhere in Clydach.
Crash-rated bollards in Clydach: FAQs
Can you install crash-rated bollards anywhere in Clydach?
We cover all of Clydach (SA6) and the rest of Swansea. We also work in Neath, Swansea and Gorseinon.
Do I need consent for crash-rated bollards on a public footway in Clydach?
Before digging near the kerb in Clydach we establish who owns the ground: adopted footways are Swansea Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
What's a typical price for crash-rated bollards in Clydach?
In Clydach, typically £1,945–£9,695 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,895 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Why can't the foundation be adjusted to suit our ground?
Because the rating belongs to the bollard and foundation as tested together. Making the hole shallower, narrower or lighter on steel changes how the system behaves on impact. If site conditions force a change, the manufacturer has to approve it in writing, and some changes mean choosing a different product such as a shallow-mount system.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
Crash-rated bollards in nearby towns
- Neath (4.3 mi)
- Swansea (4.7 mi)
- Gorseinon (6.1 mi)
- Port Talbot (7.7 mi)
- Ystalyfera (7.7 mi)
- Ammanford (8.5 mi)