Swansea · Wales
Automatic bollard servicing in Clydach
Local automatic bollard service visits across Clydach — we diagnose, explain and price in writing before doing more.
Computer-generated imageAbout automatic bollard service visits in Clydach
We carry out automatic bollard service visits throughout Clydach, typically for schools, town-centre squares and small industrial units. Each visit is recorded, giving a maintenance history for the installation.
We cover Clydach's SA6 postcode district, including places such as Craig-cefn-parc and Rhyd-y-gwin. Nearby, we also work in Neath (4.3 miles), Swansea (4.7 miles), Gorseinon (6.1 miles) and Port Talbot (7.7 miles), measured as the crow flies. Swansea is around 5 miles away.
Local details
- Area
- Swansea, Wales
- Highway authority
- Swansea Council (local roads)
- Planning authority
- Swansea Council
- Postcodes
- SA6
- Guide price
- Typically £95–£335 per visit + VAT
- Survey
- Paid visit, price confirmed in writing first
- Nearby
- Neath (4.3 mi), Swansea (4.7 mi), Gorseinon (6.1 mi), Port Talbot (7.7 mi)
Guide prices for Clydach
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £95–£195 + VAT | One bollard, planned service and safety checks |
| Upgraded | £165–£265 + VAT | Two bollards, full service and written report |
| Premium | £235–£335 + VAT | Larger or rated systems to manufacturer procedures |
Per planned service visit, first bollard; -3% for Wales. Guide only — the visit price is confirmed in writing first.
Why Clydach sites book automatic bollard service visits
Typical reasons for automatic bollard service visits in Clydach:
- Systems that have started to run slowly or noisily
- Bollards inherited with a building and no service history
- Residential estates with shared automatic bollards
Before we dig in Clydach
In Clydach the highway authority for local roads is Swansea Council. We confirm whether the ground is adopted highway before quoting, because bollards on a public footway need its agreement first.
Many private-land installations in Clydach need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Swansea Council before posts go in.
Servicing rarely needs excavation, but the condition of the ground around the bollard tells a lot about its health. Drainage outlets are tested by running water into the pit; where they no longer drain, the cause may be a collapsed pipe or a soakaway that has silted up, which may need a separate drainage repair quoted in writing.
- For crash-rated automatic bollards, follow the manufacturer's maintenance requirements so the bollard continues to perform as tested.
- Keep written records of each service, including tests of safety devices and emergency functions.
From survey to handover
Agree the visit or contract
We price a one-off visit or a contract in writing, with the visit frequency suggested for your usage. Nothing is booked until you have agreed it.
Service and test
The pit, drainage, drive, electrics, safety devices and access inputs are serviced and tested, and the controller log is read.
Report and recommend
You receive a written report of what was checked and found. Any repair needed is quoted separately in writing for your approval.
Choosing the right spec
| Option | Detail |
|---|---|
| Hydraulic servicing | Fluid, hoses, seals, pump and valve checks, with fluid topped up or changed as needed. |
| Electro-mechanical servicing | Motor, gearbox, couplings and sensor checks, with adjustment of limits and positions. |
| Safety and access testing | Loops, photocells, lights, manual release, emergency functions and access control inputs tested on every visit. |
What affects the quote
Our Wales guide prices are a starting point; the survey in Clydach firms them up. What tends to move them:
- Visit frequency and contract length
- Rated bollards with manufacturer-specified procedures
- Hydraulic or electro-mechanical drive
Keeping them working
If the site changes how the entrance is used, such as longer opening hours or heavier delivery vehicles, mention it before the next visit so the service frequency and safety settings can be reconsidered. After snow, clear around the head before use.
We can also service, repair or replace existing posts anywhere in Clydach.
Common questions
Can you carry out automatic bollard service visits anywhere in Clydach?
We cover all of Clydach (SA6) and the rest of Swansea. We also work in Neath, Swansea and Gorseinon.
Who gives permission for bollards on the pavement in Clydach?
Before digging near the kerb in Clydach we establish who owns the ground: adopted footways are Swansea Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
What's a typical price for automatic bollard service visits in Clydach?
In Clydach, typically £95–£335 per planned service visit, first bollard, plus VAT, using our Wales guide prices. We confirm the visit price in writing before attending.
What is checked during a bollard service?
The cassette and drainage, the hydraulic or electro-mechanical drive, electrics, rise and fall times, all safety devices, the manual release, emergency functions and access control inputs. You receive a written report afterwards.
How often should automatic bollards be serviced?
It depends on how often they cycle and the risk at the site. Commonly that means every three to six months, with busier or security entrances at the more frequent end. We suggest a frequency once we know your usage.
Bollard servicing near Clydach
- Neath (4.3 mi)
- Swansea (4.7 mi)
- Gorseinon (6.1 mi)
- Port Talbot (7.7 mi)
- Ystalyfera (7.7 mi)
- Ammanford (8.5 mi)