Wales · 3 towns
Crash-rated bollard installation in Swansea
Crash-rated bollards for sites across Swansea: surveyed, quoted in writing and installed by our crews.
Computer-generated imageCrash-rated bollards in Swansea
Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation. We cover Swansea — Swansea, Gorseinon and Clydach.
Highway authorities for local roads in Swansea: Swansea Council.
Choose your town in Swansea
Guide prices in Swansea
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£5,195 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,245–£7,545 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,595–£9,695 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; -3% for Wales. Guide only — the fixed price follows a survey.
Local authorities across Swansea
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Swansea | Swansea Council | Swansea Council |
| Gorseinon | Swansea Council | Swansea Council |
| Clydach | Swansea Council | Swansea Council |
Rules for crash-rated bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Wales.
How installation works
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Fix reinforcement and set the posts
The reinforcement cage is built to the drawing and the bollards are held to line and level in templates. Concrete is poured to the specified grade, with samples taken for testing if the specification calls for them.
Hand over a build record
You receive photographs of the reinforcement and excavation before each pour, concrete delivery tickets, as-built positions and the manufacturer's product certification, ready for your adviser and insurers.
Crash-rated bollards in Swansea: FAQs
Do you cover all of Swansea for crash-rated bollards?
Yes — including Swansea, Gorseinon and Clydach. Enter your postcode in the price calculator to confirm.
How much do crash-rated bollards cost in Swansea?
In Swansea, typically £1,945–£9,695 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,895 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Swansea?
For local roads, Swansea Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
Is a heavy unrated steel post good enough instead?
Not where the risk is a deliberate vehicle attack. An unrated post may look solid, but nobody can say what it will stop because it has never been tested with its foundation. Unrated steel suits nuisance parking and low-speed knocks, not crowds or buildings flagged in a security assessment.
Why can't the foundation be adjusted to suit our ground?
Because the rating belongs to the bollard and foundation as tested together. Making the hole shallower, narrower or lighter on steel changes how the system behaves on impact. If site conditions force a change, the manufacturer has to approve it in writing, and some changes mean choosing a different product such as a shallow-mount system.