Bollard Installers

Wales · 5 towns

Automatic rising bollard installation in Caerphilly

Automatic bollards for sites across Caerphilly: surveyed, quoted in writing and installed by our crews.

Stainless steel automatic rising bollard in a controlled access lane, with induction loop slots cut in the tarmac and a red and green signal on a postComputer-generated image

Automatic bollards in Caerphilly

We supply and install automatic bollards across Caerphilly, with local pages for 5 towns below. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.

Highway authorities for local roads in Caerphilly: Caerphilly County Borough Council.

Choose your town in Caerphilly

Guide prices in Caerphilly

SpecificationGuide priceIncludes
Standard£2,895–£7,795 + VATElectro-mechanical or entry hydraulic, controls, loops and photocell
Upgraded£6,395–£11,295 + VATHeavy-duty hydraulic, traffic light, signs and LED head
Premium£9,895–£14,595 + VATHigh-cycle or crash-rated automatic bollard

Per bollard, installed with controls, loops and commissioning; -3% for Wales. Guide only — the fixed price follows a survey.

Local authorities across Caerphilly

TownHighway / roads authorityPlanning authority
CaerphillyCaerphilly County Borough CouncilCaerphilly County Borough Council
RiscaCaerphilly County Borough CouncilCaerphilly County Borough Council
BlackwoodCaerphilly County Borough CouncilCaerphilly County Borough Council
BargoedCaerphilly County Borough CouncilCaerphilly County Borough Council
AbercarnCaerphilly County Borough CouncilCaerphilly County Borough Council

Rules for automatic bollards in Wales

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.

Details and sources: bollard rules in Wales.

How installation works

Survey and risk assessment

A free site survey covers traffic patterns, who uses the entrance, power, drainage routes and buried services. We draft the safety arrangement from that, and you receive a fixed written quote.

Excavate and set cassettes

Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.

Power and controls

A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.

Train and hand over

Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.

Automatic bollards in Caerphilly: FAQs

Do you cover all of Caerphilly for automatic bollards?

Yes — including Caerphilly, Risca, Blackwood, Bargoed and Abercarn. Enter your postcode in the price calculator to confirm.

How much do automatic bollards cost in Caerphilly?

In Caerphilly, typically £2,895–£14,595 per bollard, installed with controls, loops and commissioning, plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Caerphilly?

For local roads, Caerphilly County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.

Why do automatic bollards need drainage?

The bollard sits in a pit that collects rain and silt. Without a drain, water corrodes the mechanism, short-circuits electrics and can freeze the post in place. A drain connection is part of every automatic installation we carry out.

Should I choose hydraulic or electro-mechanical bollards?

Choose by how often the bollard will move and how you want it maintained. Hydraulic units suit busy entrances and heavier rated posts but need fluid and seal checks. Electro-mechanical units avoid fluid and are often simpler to look after at moderate traffic levels.

Other services in Caerphilly

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote