Wales · 5 towns
Warehouse and loading-bay bollards in Caerphilly
Warehouse bollards for sites across Caerphilly: surveyed, quoted in writing and installed by our crews.
Computer-generated imageWarehouse bollards in Caerphilly
Across Caerphilly, typical sites for warehouse impact bollards include small industrial units, community buildings and schools. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
Highway authorities for local roads in Caerphilly: Caerphilly County Borough Council.
Choose your town in Caerphilly
Guide prices in Caerphilly
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £165–£585 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £465–£885 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £765–£1,145 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; -3% for Wales. Guide only — the fixed price follows a survey.
Highway and planning authorities in Caerphilly
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Caerphilly | Caerphilly County Borough Council | Caerphilly County Borough Council |
| Risca | Caerphilly County Borough Council | Caerphilly County Borough Council |
| Blackwood | Caerphilly County Borough Council | Caerphilly County Borough Council |
| Bargoed | Caerphilly County Borough Council | Caerphilly County Borough Council |
| Abercarn | Caerphilly County Borough Council | Caerphilly County Borough Council |
Rules for warehouse impact bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Wales.
How installation works
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Plan around operations
Work is phased by aisle or zone, or done out of hours, with each area barriered off while drilling. Dust is controlled with extraction where products are stored nearby.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Fix, torque and mark
Bollards and guards are fixed and torqued, then any associated floor markings are applied so drivers can see protected zones.
Warehouse bollards in Caerphilly: FAQs
Do you cover all of Caerphilly for warehouse impact bollards?
Yes — including Caerphilly, Risca, Blackwood, Bargoed and Abercarn. Enter your postcode in the price calculator to confirm.
How much do warehouse impact bollards cost in Caerphilly?
In Caerphilly, typically £165–£1,145 per bollard, supplied and fixed, plus VAT, with a minimum job of £425 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Caerphilly?
For local roads, Caerphilly County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What size bollard do we need for forklifts?
That depends on the forklift's weight with load and how fast it travels near the asset, not just the post diameter. Tested products state their impact performance, which can be compared with your fleet. We size from your vehicles at the survey.
Can bollards be fixed to a thin warehouse floor?
Sometimes, using larger base plates, through-bolts or polymer bollards that reduce anchor loads. If the slab is too thin or damaged, a new local foundation may be needed. We check the slab before recommending a fixing.