Bollard Installers

London · England

Automatic rising bollard installation in Enfield

Local installation of automatic bollards in Enfield — free survey, fixed written price, and posts set to the right spacing for people and vehicles.

Stainless steel automatic rising bollard in a controlled access lane, with induction loop slots cut in the tarmac and a red and green signal on a postComputer-generated image

Enfield automatic bollards

From estate car parks, shopping parades and places of worship, Enfield has plenty of places where automatic bollards earn their keep. Automatic bollards are available unrated for traffic control or crash-tested for security entrances.

We cover Enfield's EN1, EN2, N21, N9, EN3 and N13 postcode districts, including places such as Edmonton, Crews Hill and Botany Bay. Nearby, we also work in Cheshunt (4.2 miles), Haringey (4.3 miles), Waltham Abbey (4.3 miles) and Waltham Forest (4.4 miles), measured as the crow flies.

Enfield at a glance

Area
London, England
Highway authority
Enfield Council (local roads)
Planning authority
Enfield Council
Postcodes
EN1, EN2, N21, N9, EN3, N13, N14 and N18
Guide price
Typically £3,445–£17,295 per bollard + VAT
Survey
Free, with a fixed written quote
Nearby
Cheshunt (4.2 mi), Haringey (4.3 mi), Waltham Abbey (4.3 mi), Waltham Forest (4.4 mi)

Enfield: typical automatic bollard prices

SpecificationGuide priceIncludes
Standard£3,445–£9,245 + VATElectro-mechanical or entry hydraulic, controls, loops and photocell
Upgraded£7,595–£13,395 + VATHeavy-duty hydraulic, traffic light, signs and LED head
Premium£11,695–£17,295 + VATHigh-cycle or crash-rated automatic bollard

Per bollard, installed with controls, loops and commissioning; +15% for London. Guide only — the fixed price follows a survey.

What Enfield sites use automatic bollards for

Around Enfield, automatic bollards usually solve one of these:

  • Entrances where a gate would block pedestrian desire lines
  • Private estates and gated developments without a full gate
  • Secure loading yards where rated automatic posts are specified

Permissions and groundwork in Enfield

The highway authority for local roads in Enfield is Enfield Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Automatic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

Many private-land installations in Enfield need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Enfield Council before posts go in.

Automatic bollards need a deep pit for the cassette and a reliable way for water to leave it. Loops are cut into a sound surface: badly cracked tarmac or block paving may need resurfacing first, because loops in broken surfaces fail early.

  • Agree emergency access with the fire and ambulance services, including how they will lower the bollards.
  • Have the electrical installation carried out and certified by a qualified electrician to BS 7671.

How the job runs

Ducts, drainage and loops

Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.

Commission and test

Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.

Train and hand over

Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.

Specification choices

OptionDetail
Heights and diametersRaised heights are commonly around 500–800 mm for traffic control and taller for security models, with diameters varying by drive and rating.
Fail-safe behaviourConfigured to lower or stay raised on power loss, with a manual release, depending on whether access or security takes priority.
Paired or multi-bollard lanesSeveral bollards can run from one controller to close a wider entrance, with lane-by-lane control where needed.

Pricing automatic bollards in Enfield

Two Enfield jobs with the same number of posts can price quite differently. The usual reasons:

  • Length of duct runs, drainage connections and power supply distance
  • Number of bollards and lanes controlled
  • Access control devices, traffic lights and signage

After installation

Typical visits clean and inspect the cassette and drain, check hydraulic fluid or gearbox condition, test loops, photocells, lights and the manual release, and read the controller's fault log. Frequency depends on how often the bollard cycles; a busy entrance needs more visits than a rarely used one.

We can also service, repair or replace existing posts anywhere in Enfield.

Automatic bollards in Enfield: FAQs

Do you install automatic bollards in Enfield?

We cover all of Enfield (EN1, EN2, N21, N9, EN3 and N13) and the rest of London. We also work in Cheshunt, Haringey and Waltham Abbey.

Who gives permission for bollards on the pavement in Enfield?

In Enfield, work on adopted pavements and verges needs consent from Enfield Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.

What's a typical price for automatic bollards in Enfield?

In Enfield, typically £3,445–£17,295 per bollard, installed with controls, loops and commissioning, plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.

How will emergency vehicles get through?

Usually by an agreed method such as a fire service key switch, a code, a remote handset held by the site or a free-exit arrangement. It should be agreed with the emergency services before the bollards go live.

Why do automatic bollards need drainage?

The bollard sits in a pit that collects rain and silt. Without a drain, water corrodes the mechanism, short-circuits electrics and can freeze the post in place. A drain connection is part of every automatic installation we carry out.

Automatic bollards in nearby towns

Other bollard services in Enfield

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote