Bollard Installers

England · 18 towns

Automatic rising bollard installation in West Yorkshire

Automatic bollards for sites across West Yorkshire: surveyed, quoted in writing and installed by our crews.

Stainless steel automatic rising bollard in a controlled access lane, with induction loop slots cut in the tarmac and a red and green signal on a postComputer-generated image

Automatic bollards in West Yorkshire

Across West Yorkshire, typical sites for automatic bollards include retail parks, stadium approaches and city-centre plazas. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.

Highway authorities for local roads in West Yorkshire: Bradford Council, Calderdale Council, Kirklees Council, Leeds City Council and Wakefield Council.

Choose your town in West Yorkshire

Guide prices in West Yorkshire

SpecificationGuide priceIncludes
Standard£2,895–£7,795 + VATElectro-mechanical or entry hydraulic, controls, loops and photocell
Upgraded£6,395–£11,295 + VATHeavy-duty hydraulic, traffic light, signs and LED head
Premium£9,895–£14,595 + VATHigh-cycle or crash-rated automatic bollard

Per bollard, installed with controls, loops and commissioning; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.

Local authorities across West Yorkshire

TownHighway / roads authorityPlanning authority
LeedsLeeds City CouncilLeeds City Council
BradfordBradford CouncilBradford Council
HuddersfieldKirklees CouncilKirklees Council
WakefieldWakefield CouncilWakefield Council
HalifaxCalderdale CouncilCalderdale Council
DewsburyKirklees CouncilKirklees Council
MorleyLeeds City CouncilLeeds City Council
KeighleyBradford CouncilBradford Council
CastlefordWakefield CouncilWakefield Council
PontefractWakefield CouncilWakefield Council
BatleyKirklees CouncilKirklees Council
YeadonLeeds City CouncilLeeds City Council
BrighouseCalderdale CouncilCalderdale Council
ShipleyBradford CouncilBradford Council
CleckheatonKirklees CouncilKirklees Council
PudseyLeeds City CouncilLeeds City Council
OssettWakefield CouncilWakefield Council
GuiseleyLeeds City CouncilLeeds City Council

Rules for automatic bollards in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.

Details and sources: bollard rules in England.

How installation works

Excavate and set cassettes

Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.

Power and controls

A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.

Commission and test

Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.

Train and hand over

Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.

Automatic bollards in West Yorkshire: FAQs

Do you cover all of West Yorkshire for automatic bollards?

Yes — including Leeds, Bradford, Huddersfield, Wakefield, Halifax, Dewsbury, Morley and Keighley. Enter your postcode in the price calculator to confirm.

How much do automatic bollards cost in West Yorkshire?

In West Yorkshire, typically £2,895–£14,595 per bollard, installed with controls, loops and commissioning, plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in West Yorkshire?

For local roads, Bradford Council, Calderdale Council, Kirklees Council, Leeds City Council and Wakefield Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Should I choose hydraulic or electro-mechanical bollards?

Choose by how often the bollard will move and how you want it maintained. Hydraulic units suit busy entrances and heavier rated posts but need fluid and seal checks. Electro-mechanical units avoid fluid and are often simpler to look after at moderate traffic levels.

Why do automatic bollards need drainage?

The bollard sits in a pit that collects rain and silt. Without a drain, water corrodes the mechanism, short-circuits electrics and can freeze the post in place. A drain connection is part of every automatic installation we carry out.

Other services in West Yorkshire

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote