North Yorkshire · England
Bollard removal in Selby
Local installation of bollard removal jobs in Selby — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageBollard removal in Selby
In the town of Selby, bollard removal jobs tend to go in at filling-station forecourts, small industrial units and community car parks. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
We work across YO8 — Selby itself and places including Barlby, Brayton, Thorpe Willoughby and Cawood. Jobs in Selby can be combined with work in Goole (9.5 miles), Pontefract (11.9 miles), York (12.1 miles) and Castleford (12.7 miles) (straight-line distances). Leeds is around 20 miles away.
Key facts for this area
- Area
- North Yorkshire, England
- Highway authority
- North Yorkshire Council (local roads)
- Planning authority
- North Yorkshire Council
- Postcodes
- YO8
- Guide price
- Typically £80–£335 per post + VAT (£95–£395 inc VAT for homes); minimum job £285
- Survey
- Free, with a fixed written quote
- Nearby
- Goole (9.5 mi), Pontefract (11.9 mi), York (12.1 mi), Castleford (12.7 mi)
Common reasons for bollard removal jobs in Selby
Typical reasons for bollard removal jobs in Selby:
- Decommissioning automatic bollards that are no longer used
- Clearing old bollards before resurfacing
- Moving bollards to new positions on the same site
What bollard removal jobs cost in Selby
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £225–£335 + VAT · £265–£395 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
Before we dig in Selby
North Yorkshire Council is the highway authority covering Selby's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (North Yorkshire Council) first — we flag this at survey.
Backfilling in compacted layers stops later settlement, which otherwise shows as a dip in the new surface. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
How the job runs
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Finishes and options
| Option | Detail |
|---|---|
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
What moves the price in Selby
When we price bollard removal jobs in Selby, these make the biggest difference:
- Cutting off or full foundation extraction
- Surface type and reinstatement
- Size of foundations and amount of spoil
Looking after them
After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
We can also service, repair or replace existing posts anywhere in Selby.
Bollard removal in Selby: FAQs
Which parts of Selby do you cover for bollard removal jobs?
We cover all of Selby (YO8) and the rest of North Yorkshire. We also work in Goole, Pontefract and York.
Who gives permission for bollards on the pavement in Selby?
North Yorkshire Council is the highway authority covering Selby's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do bollard removal jobs cost in Selby?
In Selby, typically £80–£335 per post removed with footing, surface made good, plus VAT (£95–£395 including VAT for homeowners), with a minimum job of £285 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
Should bollards be cut off or fully removed?
Cut off if the area is staying as it is and nothing will be built or dug there later. Fully remove if you are resurfacing, planting or installing something new, because buried concrete gets in the way. The quote can price both.
Bollard removal in nearby towns
- Goole (9.5 mi)
- Pontefract (11.9 mi)
- York (12.1 mi)
- Castleford (12.7 mi)
- Doncaster (18.2 mi)
- Wakefield (18.9 mi)