Surrey · England
Bollard removal in Ewell
Planning bollard removal jobs in Ewell? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout bollard removal jobs in Ewell
Bollard removal jobs suit plenty of Ewell sites, local parades, community car parks and community buildings among them. Removal of fixed, removable, telescopic and automatic bollards, including foundations, with the surface made good to match.
Coverage in Ewell takes in the KT17 postcode district and nearby places like Epsom Downs and North Looe. We also cover neighbouring Epsom (1.6 miles), Kingston upon Thames (2.5 miles), Banstead (2.6 miles) and Sutton (3.3 miles) — distances are straight-line. It sits roughly 32 miles from Reading as the crow flies.
Local details
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Epsom and Ewell
- Postcodes
- KT17
- Guide price
- Typically £85–£365 per post + VAT (£95–£435 inc VAT for homes); minimum job £305
- Survey
- Free, with a fixed written quote
- Nearby
- Epsom (1.6 mi), Kingston upon Thames (2.5 mi), Banstead (2.6 mi), Sutton (3.3 mi)
Ewell: typical bollard removal prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £85–£205 + VAT · £95–£245 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £165–£285 + VAT · £195–£335 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £255–£365 + VAT · £305–£435 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; +6% for South East. Guide only — the fixed price follows a survey.
Why Ewell sites book bollard removal jobs
What bollard removal jobs usually sort out in Ewell:
- Clearing old bollards before resurfacing
- Access routes no longer needing control
- Decommissioning automatic bollards that are no longer used
What we check first in Ewell
The highway authority for local roads in Ewell is Surrey County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Ewell need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Epsom and Ewell before posts go in.
Backfilling in compacted layers stops later settlement, which otherwise shows as a dip in the new surface. Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
What happens on site
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Specification choices
| Option | Detail |
|---|---|
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
Pricing bollard removal jobs in Ewell
Our South East guide prices are a starting point; the survey in Ewell firms them up. What tends to move them:
- Access, working hours and waste disposal
- Number and type of bollards
- Cutting off or full foundation extraction
Looking after them
If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete. Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled.
For damaged or loose posts in Ewell, repairs and replacements are priced in writing first.
Bollard removal in Ewell: FAQs
Can you carry out bollard removal jobs anywhere in Ewell?
We cover all of Ewell (KT17) and the rest of Surrey. We also work in Epsom, Kingston upon Thames and Banstead.
Do I need consent for bollards on a public footway in Ewell?
In Ewell, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do bollard removal jobs cost in Ewell?
In Ewell, typically £85–£365 per post removed with footing, surface made good, plus VAT (£95–£435 including VAT for homeowners), with a minimum job of £305 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.
Bollard removal in nearby towns
- Epsom (1.6 mi)
- Kingston upon Thames (2.5 mi)
- Banstead (2.6 mi)
- Sutton (3.3 mi)
- Merton (5 mi)
- Leatherhead (5.2 mi)