Pembrokeshire · Wales
Concrete bollard installation in Milford Haven
Planning concrete bollards in Milford Haven? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageMilford Haven concrete bollards
From high street shopfronts, community car parks and small industrial units, Milford Haven has plenty of places where concrete bollards earn their keep. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
We work across SA73, SA72 and SA71 — Milford Haven itself and places including Neyland, Waterston, Herbrandston and Llanstadwell. We also cover neighbouring Haverfordwest (6.7 miles) — distances are straight-line.
Milford Haven at a glance
- Area
- Pembrokeshire, Wales
- Highway authority
- Pembrokeshire County Council (local roads)
- Planning authority
- Pembrokeshire County Council
- Postcodes
- SA73, SA72 and SA71
- Guide price
- Typically £165–£575 per bollard + VAT; minimum job £575
- Survey
- Free, with a fixed written quote
- Nearby
- Haverfordwest (6.7 mi)
What concrete bollards cost in Milford Haven
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £165–£345 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £295–£465 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £415–£575 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Concrete bollards in Milford Haven: common uses
Common uses in a place like Milford Haven:
- Park entrances and greens where vehicles should not drive
- Rural and coastal sites where steel would corrode
- Retail parks and landscaped car parks
What we check first in Milford Haven
Before digging near the kerb in Milford Haven we establish who owns the ground: adopted footways are Pembrokeshire County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
If your site in Milford Haven is listed or inside a conservation area, check with the local planning authority (Pembrokeshire County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Because concrete bollards are heavy, a weak foundation shows itself quickly as a tilt. Services under footways are traced before excavation.
- On public highway or council land, agree positions and specification with the highway authority or landowner.
- Plan lifts with an exclusion zone and suitable lifting equipment, and record the method for the site.
How the job runs
Survey and choose
A free site survey looks at the setting, ground, delivery access and where a lifting vehicle can stand. You receive a fixed written quote with the product, finish and fixing.
Plan lifting
Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.
Protect while the grout cures
Bollards are left undisturbed until the grout and foundation have gained strength, with temporary barriers if vehicles use the area. Lines that need to open to traffic quickly can use faster-setting grouts where the product allows.
Finishes and options
| Option | Detail |
|---|---|
| Reflective and contrasting details | Inset reflective bands, contrasting tops or rings for visibility to drivers and partially sighted pedestrians. |
| Planters and blocks | Concrete planters and seating blocks used in place of bollards where a softer look is wanted. |
| Surface finishes | Smooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering. |
Pricing concrete bollards in Milford Haven
Our Wales guide prices are a starting point; the survey in Milford Haven firms them up. What tends to move them:
- Number of bollards
- Size, shape and surface finish
- Foundation depth and ground conditions
Looking after them
Concrete bollards need very little: occasional washing, removal of graffiti with suitable cleaners, and checks for chips, cracks and lean. Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known.
If posts in Milford Haven are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install concrete bollards in Milford Haven?
We cover all of Milford Haven (SA73, SA72 and SA71) and the rest of Pembrokeshire. We also work in Haverfordwest.
Do I need consent for concrete bollards on a public footway in Milford Haven?
Local roads and pavements in Milford Haven are the responsibility of Pembrokeshire County Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
What's a typical price for concrete bollards in Milford Haven?
In Milford Haven, typically £165–£575 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
How are concrete bollards fixed down?
Usually with a steel dowel at the base grouted into a small concrete foundation, so they cannot be pushed or rocked. Some designs have a root buried in the ground instead. Free-standing placement is used only for temporary layouts.
Can a chipped concrete bollard be repaired?
Small chips and edge damage can be filled with colour-matched mortar. A bollard cracked through or broken at its base needs replacing. Matching finishes is easier if the original product is still made.