Pembrokeshire · Wales
Ram-raid protection bollards in Milford Haven
Local installation of ram-raid bollards in Milford Haven — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageRam-raid bollards in Milford Haven
Across Milford Haven, typical sites for ram-raid bollards include community car parks, small industrial units and high street shopfronts. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We work across SA73, SA72 and SA71 — Milford Haven itself and places including Neyland, Waterston, Herbrandston and Llanstadwell. Nearby, we also work in Haverfordwest (6.7 miles), measured as the crow flies.
Key facts for this area
- Area
- Pembrokeshire, Wales
- Highway authority
- Pembrokeshire County Council (local roads)
- Planning authority
- Pembrokeshire County Council
- Postcodes
- SA73, SA72 and SA71
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £915
- Survey
- Free, with a fixed written quote
- Nearby
- Haverfordwest (6.7 mi)
What Milford Haven sites use ram-raid bollards for
Typical reasons Milford Haven sites choose ram-raid bollards:
- Warehouses and trade counters with roller-shutter entrances
- Filling station kiosks and forecourt shops
- Convenience stores and off-licences with glazed frontages
Milford Haven: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £705–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
What we check first in Milford Haven
Local roads and pavements in Milford Haven are the responsibility of Pembrokeshire County Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
If your site in Milford Haven is listed or inside a conservation area, check with the local planning authority (Pembrokeshire County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
From survey to handover
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Options to consider
| Option | Detail |
|---|---|
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
What moves the price in Milford Haven
Two Milford Haven jobs with the same number of posts can price quite differently. The usual reasons:
- Covers and finishes for shopping streets
- Removable positions and their locks
- Unrated, PAS 170-1 or crash-rated product
After installation
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
We can also service, repair or replace existing posts anywhere in Milford Haven.
Common questions
Can you install ram-raid bollards anywhere in Milford Haven?
We cover all of Milford Haven (SA73, SA72 and SA71) and the rest of Pembrokeshire. We also work in Haverfordwest.
Do I need consent for ram-raid bollards on a public footway in Milford Haven?
In Milford Haven the highway authority for local roads is Pembrokeshire County Council. We confirm whether the ground is adopted highway before quoting, because ram-raid bollards on a public footway need its agreement first.
What's a typical price for ram-raid bollards in Milford Haven?
In Milford Haven, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £915 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.