Pembrokeshire · Wales
Shallow-mount security bollard installation in Milford Haven
Shallow-mount bollards supplied and fitted in Milford Haven, Pembrokeshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageMilford Haven shallow-mount bollards
In the town of Milford Haven, shallow-mount bollards tend to go in at town-centre squares, high street shopfronts and filling-station forecourts. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Coverage in Milford Haven takes in the SA73, SA72 and SA71 postcode districts and nearby places like Neyland, Waterston, Herbrandston and Llanstadwell. Nearby, we also work in Haverfordwest (6.7 miles), measured as the crow flies.
Key facts for this area
- Area
- Pembrokeshire, Wales
- Highway authority
- Pembrokeshire County Council (local roads)
- Planning authority
- Pembrokeshire County Council
- Postcodes
- SA73, SA72 and SA71
- Guide price
- Typically £1,945–£8,745 per bollard + VAT; minimum job £4,845
- Survey
- Free, with a fixed written quote
- Nearby
- Haverfordwest (6.7 mi)
Milford Haven: typical shallow-mount bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£4,795 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,995–£6,845 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £5,995–£8,745 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Shallow-mount bollards in Milford Haven: common uses
Around Milford Haven, shallow-mount bollards usually solve one of these:
- Sites where service diversions would be slow or impractical
- Retrofits outside occupied buildings with tight programmes
- Footways with dense utility runs just below the surface
What we check first in Milford Haven
In Milford Haven the highway authority for local roads is Pembrokeshire County Council. We confirm whether the ground is adopted highway before quoting, because shallow-mount bollards on a public footway need its agreement first.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Pembrokeshire County Council) first — we flag this at survey.
Shallow does not mean simple. On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail.
- Keep the test certificate for the exact system and configuration, including the minimum run length and end details.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
How the job runs
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Options to consider
| Option | Detail |
|---|---|
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
| Modular cassette sections | Pre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
Pricing shallow-mount bollards in Milford Haven
Two Milford Haven jobs with the same number of posts can price quite differently. The usual reasons:
- Amount of hand digging needed around live services
- Lifting, storing and relaying natural stone paving
- Length of run and the system needed to achieve the rating
Keeping them working
Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands. If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation.
We can also service, repair or replace existing posts anywhere in Milford Haven.
Shallow-mount bollards in Milford Haven: FAQs
Do you install shallow-mount bollards in Milford Haven?
We cover all of Milford Haven (SA73, SA72 and SA71) and the rest of Pembrokeshire. We also work in Haverfordwest.
Who gives permission for bollards on the pavement in Milford Haven?
In Milford Haven the highway authority for local roads is Pembrokeshire County Council. We confirm whether the ground is adopted highway before quoting, because shallow-mount bollards on a public footway need its agreement first.
How much do shallow-mount bollards cost in Milford Haven?
In Milford Haven, typically £1,945–£8,745 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,845 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.
Can shallow-mount bollards go on a car park deck?
Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.