Wales · 2 towns
Ram-raid protection bollards in Pembrokeshire
Ram-raid bollards for sites across Pembrokeshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageRam-raid bollards in Pembrokeshire
We supply and install ram-raid bollards across Pembrokeshire, with local pages for 2 towns below. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Highway authorities for local roads in Pembrokeshire: Pembrokeshire County Council.
Choose your town in Pembrokeshire
Guide prices in Pembrokeshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £705–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Who looks after the roads in Pembrokeshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Haverfordwest | Pembrokeshire County Council | Pembrokeshire County Council |
| Milford Haven | Pembrokeshire County Council | Pembrokeshire County Council |
Rules for ram-raid bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Wales.
How installation works
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Ram-raid bollards in Pembrokeshire: FAQs
Do you cover all of Pembrokeshire for ram-raid bollards?
Yes — including Haverfordwest and Milford Haven. Enter your postcode in the price calculator to confirm.
How much do ram-raid bollards cost in Pembrokeshire?
In Pembrokeshire, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £915 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Pembrokeshire?
For local roads, Pembrokeshire County Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.