Somerset · England
Concrete bollard installation in Bath
Planning concrete bollards in Bath? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout concrete bollards in Bath
Across Bath, typical sites for concrete bollards include supermarket frontages, leisure centres and housing association car parks. Precast concrete and reconstituted stone bollards for public realm, parks, boundaries and estates, dowelled or bedded in place.
We cover Bath's BA1 and BA2 postcode districts, including places such as Upper Swainswick, Kelston, Tadwick and Langridge. We also cover neighbouring Trowbridge (7.7 miles), Kingswood (8.3 miles), Mangotsfield (9.9 miles) and Frome (10.3 miles) — distances are straight-line. Bath is about 12 miles from Bristol.
Bath at a glance
- Area
- Somerset, England
- Highway authority
- Bath and North East Somerset Council (local roads)
- Planning authority
- Bath and North East Somerset Council
- Postcodes
- BA1 and BA2
- Guide price
- Typically £175–£595 per bollard + VAT; minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Trowbridge (7.7 mi), Kingswood (8.3 mi), Mangotsfield (9.9 mi), Frome (10.3 mi)
What Bath sites use concrete bollards for
Common uses in a place like Bath:
- Edges of open land and verges subject to unauthorised vehicle access
- Town centre squares and pedestrianised streets
- Rural and coastal sites where steel would corrode
What concrete bollards cost in Bath
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£355 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £305–£475 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £425–£595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Bath
In Bath, work on adopted pavements and verges needs consent from Bath and North East Somerset Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Bath need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Bath and North East Somerset Council before posts go in.
Because concrete bollards are heavy, a weak foundation shows itself quickly as a tilt. Park and verge locations often have tree roots nearby, which need protecting and can push bollards over time if set too close.
- Plan lifts with an exclusion zone and suitable lifting equipment, and record the method for the site.
- On public highway or council land, agree positions and specification with the highway authority or landowner.
What happens on site
Plan lifting
Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Protect while the grout cures
Bollards are left undisturbed until the grout and foundation have gained strength, with temporary barriers if vehicles use the area. Lines that need to open to traffic quickly can use faster-setting grouts where the product allows.
Choosing the right spec
| Option | Detail |
|---|---|
| Reflective and contrasting details | Inset reflective bands, contrasting tops or rings for visibility to drivers and partially sighted pedestrians. |
| Reconstituted stone | Crushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings. |
| Precast concrete | Grey or coloured concrete in round, square, tapered or domed shapes, the economical public realm option. |
What affects the quote
Two Bath jobs with the same number of posts can price quite differently. The usual reasons:
- Precast concrete or reconstituted stone
- Number of bollards
- Reinstatement of paving or turf
After installation
If a line is regularly struck by vehicles, consider whether steel cores, a tested product or a different layout would suit better. Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known.
We can also service, repair or replace existing posts anywhere in Bath.
Common questions
Can you install concrete bollards anywhere in Bath?
We cover all of Bath (BA1 and BA2) and the rest of Somerset. We also work in Trowbridge, Kingswood and Mangotsfield.
Who gives permission for bollards on the pavement in Bath?
The highway authority for local roads in Bath is Bath and North East Somerset Council; motorways and trunk roads sit with National Highways. Concrete bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do concrete bollards cost in Bath?
In Bath, typically £175–£595 per bollard, supplied and installed, plus VAT, with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Can concrete bollards be moved later?
Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.
Are concrete bollards anti-ram?
Only if that specific product has been crash-tested. Weight alone does not make a bollard crash-rated, and an untested concrete post can crack or shear when hit hard. Tested concrete-clad products exist for security use.
Concrete bollards in nearby towns
- Trowbridge (7.7 mi)
- Kingswood (8.3 mi)
- Mangotsfield (9.9 mi)
- Frome (10.3 mi)
- Bristol (11.5 mi)
- Yate (11.7 mi)