Bollard Installers

Wales · 3 towns

Concrete bollard installation in Swansea

Concrete bollards for sites across Swansea: surveyed, quoted in writing and installed by our crews.

Precast concrete bollards around the edge of a town square with granite paving, trees and benchesComputer-generated image

Concrete bollards in Swansea

We supply and install concrete bollards across Swansea, with local pages for 3 towns below. Precast concrete and reconstituted stone bollards for public realm, parks, boundaries and estates, dowelled or bedded in place.

Highway authorities for local roads in Swansea: Swansea Council.

Choose your town in Swansea

Guide prices in Swansea

SpecificationGuide priceIncludes
Standard£165–£345 + VATStandard post, foundation, reinstatement
Upgraded£295–£465 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£415–£575 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.

Local authorities across Swansea

TownHighway / roads authorityPlanning authority
SwanseaSwansea CouncilSwansea Council
GorseinonSwansea CouncilSwansea Council
ClydachSwansea CouncilSwansea Council

Rules for concrete bollards in Wales

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.

Details and sources: bollard rules in Wales.

How installation works

Plan lifting

Each bollard's weight is checked, and a lifting method is chosen, such as a vacuum lifter or crane arm, with an exclusion zone set during lifts.

Excavate and cast foundations

Small foundations are excavated, checked for services and cast with a dowel hole or sleeve at the right position and level.

Set the bollards

Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.

Protect while the grout cures

Bollards are left undisturbed until the grout and foundation have gained strength, with temporary barriers if vehicles use the area. Lines that need to open to traffic quickly can use faster-setting grouts where the product allows.

Concrete bollards in Swansea: FAQs

Do you cover all of Swansea for concrete bollards?

Yes — including Swansea, Gorseinon and Clydach. Enter your postcode in the price calculator to confirm.

How much do concrete bollards cost in Swansea?

In Swansea, typically £165–£575 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Swansea?

For local roads, Swansea Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.

Can concrete bollards be moved later?

Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.

How are concrete bollards fixed down?

Usually with a steel dowel at the base grouted into a small concrete foundation, so they cannot be pushed or rocked. Some designs have a root buried in the ground instead. Free-standing placement is used only for temporary layouts.

Other services in Swansea

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote