Swansea · Wales
Concrete bollard installation in Clydach
Concrete bollards for sites across Clydach and the rest of Swansea, from the first measurement to the last relaid paving block.
Computer-generated imageAbout concrete bollards in Clydach
From community car parks, community buildings and high street shopfronts, Clydach has plenty of places where concrete bollards earn their keep. Finishes range from plain grey concrete to exposed aggregate and stone-effect surfaces that suit civic and landscaped settings.
We work across SA6 — Clydach itself and places including Craig-cefn-parc and Rhyd-y-gwin. We also cover neighbouring Neath (4.3 miles), Swansea (4.7 miles), Gorseinon (6.1 miles) and Port Talbot (7.7 miles) — distances are straight-line. Clydach is about 5 miles from Swansea.
Clydach at a glance
- Area
- Swansea, Wales
- Highway authority
- Swansea Council (local roads)
- Planning authority
- Swansea Council
- Postcodes
- SA6
- Guide price
- Typically £165–£575 per bollard + VAT; minimum job £575
- Survey
- Free, with a fixed written quote
- Nearby
- Neath (4.3 mi), Swansea (4.7 mi), Gorseinon (6.1 mi), Port Talbot (7.7 mi)
Where concrete bollards go in around Clydach
Around Clydach, concrete bollards usually solve one of these:
- Rural and coastal sites where steel would corrode
- School, library and civic building forecourts
- Edges of open land and verges subject to unauthorised vehicle access
Concrete bollard prices in Clydach
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £165–£345 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £295–£465 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £415–£575 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Before we dig in Clydach
Before digging near the kerb in Clydach we establish who owns the ground: adopted footways are Swansea Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
Many private-land installations in Clydach need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Swansea Council before posts go in.
Each post sits on a concrete base on firm ground, and on soft verges or made ground the base is deepened or widened to suit. Because concrete bollards are heavy, a weak foundation shows itself quickly as a tilt.
- Plan lifts with an exclusion zone and suitable lifting equipment, and record the method for the site.
- On public highway or council land, agree positions and specification with the highway authority or landowner.
How the job runs
Survey and choose
A free site survey looks at the setting, ground, delivery access and where a lifting vehicle can stand. You receive a fixed written quote with the product, finish and fixing.
Set the bollards
Each bollard is lowered onto a mortar bed with its dowel grouted in, checked plumb and aligned with its neighbours.
Reinstate and clean
Paving is made good around each base and the bollards are cleaned of mortar and handling marks.
Choosing the right spec
| Option | Detail |
|---|---|
| Reconstituted stone | Crushed natural stone in a concrete mix, giving a Portland, buff or granite-like appearance for civic and heritage settings. |
| Reflective and contrasting details | Inset reflective bands, contrasting tops or rings for visibility to drivers and partially sighted pedestrians. |
| Surface finishes | Smooth, exposed aggregate, acid-etched or shot-blasted, chosen to suit paving and resist visible weathering. |
What affects the quote
Two Clydach jobs with the same number of posts can price quite differently. The usual reasons:
- Precast concrete or reconstituted stone
- Number of bollards
- Reinstatement of paving or turf
Looking after them
In areas salted heavily in winter, check for surface spalling. Keep a note of the product name, finish and supplier, because matching a single damaged bollard years later is much easier when the original specification is known.
For damaged or loose posts in Clydach, repairs and replacements are priced in writing first.
Common questions
Do you install concrete bollards in Clydach?
We cover all of Clydach (SA6) and the rest of Swansea. We also work in Neath, Swansea and Gorseinon.
Do I need consent for concrete bollards on a public footway in Clydach?
In Clydach the highway authority for local roads is Swansea Council. We confirm whether the ground is adopted highway before quoting, because concrete bollards on a public footway need its agreement first.
How much do concrete bollards cost in Clydach?
In Clydach, typically £165–£575 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
How are concrete bollards fixed down?
Usually with a steel dowel at the base grouted into a small concrete foundation, so they cannot be pushed or rocked. Some designs have a root buried in the ground instead. Free-standing placement is used only for temporary layouts.
Can concrete bollards be moved later?
Yes, though it takes lifting equipment. Dowel-fixed bollards can be lifted off once the grout is broken out, and the foundation removed or reused. Plan for it if you think the layout may change.
Concrete bollards near Clydach
- Neath (4.3 mi)
- Swansea (4.7 mi)
- Gorseinon (6.1 mi)
- Port Talbot (7.7 mi)
- Ystalyfera (7.7 mi)
- Ammanford (8.5 mi)