Wales · 3 towns
Crash-rated bollard installation in Carmarthenshire
Crash-rated bollards for sites across Carmarthenshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageCrash-rated bollards in Carmarthenshire
Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation. We cover Carmarthenshire — Llanelli, Ammanford and Carmarthen.
Highway authorities for local roads in Carmarthenshire: Carmarthenshire County Council.
Choose your town in Carmarthenshire
Guide prices in Carmarthenshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£5,195 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,245–£7,545 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,595–£9,695 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; -3% for Wales. Guide only — the fixed price follows a survey.
Who looks after the roads in Carmarthenshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Llanelli | Carmarthenshire County Council | Carmarthenshire County Council |
| Ammanford | Carmarthenshire County Council | Carmarthenshire County Council |
| Carmarthen | Carmarthenshire County Council | Carmarthenshire County Council |
Rules for crash-rated bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Wales.
How installation works
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Crash-rated bollards in Carmarthenshire: FAQs
Do you cover all of Carmarthenshire for crash-rated bollards?
Yes — including Llanelli, Ammanford and Carmarthen. Enter your postcode in the price calculator to confirm.
How much do crash-rated bollards cost in Carmarthenshire?
In Carmarthenshire, typically £1,945–£9,695 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,895 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Carmarthenshire?
For local roads, Carmarthenshire County Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.