Carmarthenshire · Wales
Crash-rated bollard installation in Llanelli
Local installation of crash-rated bollards in Llanelli — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageLlanelli crash-rated bollards
Whether it's filling-station forecourts, schools and small industrial units, crash-rated bollards in Llanelli are planned around who needs to get through and who doesn't. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
We work across SA15, SA14 and SA16 — Llanelli itself and places including Pontyberem, Pwll, Pont Henri and Bancffosfelen. We also cover neighbouring Gorseinon (5.2 miles), Swansea (10.3 miles), Ammanford (10.7 miles) and Clydach (11.2 miles) — distances are straight-line. It sits roughly 10 miles from Swansea as the crow flies.
Key facts for this area
- Area
- Carmarthenshire, Wales
- Highway authority
- Carmarthenshire County Council (local roads)
- Planning authority
- Carmarthenshire County Council
- Postcodes
- SA15, SA14 and SA16
- Guide price
- Typically £1,945–£9,695 per bollard + VAT; minimum job £3,895
- Survey
- Free, with a fixed written quote
What Llanelli sites use crash-rated bollards for
Common uses in a place like Llanelli:
- Glazed frontages on corporate and public buildings
- Stadiums, arenas and event venues with predictable crowd flows
- Transport interchanges, taxi ranks and drop-off zones
Llanelli: typical crash-rated bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£5,195 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,245–£7,545 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,595–£9,695 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; -3% for Wales. Guide only — the fixed price follows a survey.
Consents, ground and services in Llanelli
Before digging near the kerb in Llanelli we establish who owns the ground: adopted footways are Carmarthenshire County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Carmarthenshire County Council) first — we flag this at survey.
Reinstatement matches paving, tactile surfaces and kerbs. Rated foundations are large, and excavation is often where projects run into trouble.
- Check that the test certificate matches the exact model, configuration and foundation being installed, and keep it with the site records.
- Agree how emergency vehicles will get through, and refer to guidance on selecting and installing vehicle security barriers such as PAS 69 or ISO 22343-2.
Installation, step by step
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Specification choices
| Option | Detail |
|---|---|
| Static rated bollards | Fixed posts for permanent lines where vehicles never need to pass. They are a straightforward rated option to install and maintain. |
| Deep or standard foundation designs | Deep foundations suit open ground where excavation is unrestricted. Where services or slabs get in the way, shallow-mount tested designs may be a better fit. |
| Decorative covers | Stainless steel, cast or polymer sleeves can be fitted over the steel core to suit a streetscape. Use covers supplied or approved by the manufacturer so the tested product is not altered. |
What moves the price in Llanelli
Two Llanelli jobs with the same number of posts can price quite differently. The usual reasons:
- Number of posts and whether a linked beam system is needed
- Traffic management, restricted working hours or night work in occupied sites
- Depth and volume of excavation, reinforcement and concrete
After installation
A rated bollard that has stopped a vehicle has done its job and should be assessed with the manufacturer; in most cases the post, and sometimes the foundation insert, is replaced rather than straightened. Keep inspection records with the original test certificate so the line's condition can be shown to insurers or a security adviser.
For damaged or loose posts in Llanelli, repairs and replacements are priced in writing first.
Crash-rated bollards in Llanelli: FAQs
Which parts of Llanelli do you cover for crash-rated bollards?
We cover all of Llanelli (SA15, SA14 and SA16) and the rest of Carmarthenshire. We also work in Gorseinon, Swansea and Ammanford.
Do I need consent for crash-rated bollards on a public footway in Llanelli?
Before digging near the kerb in Llanelli we establish who owns the ground: adopted footways are Carmarthenshire County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
What's a typical price for crash-rated bollards in Llanelli?
In Llanelli, typically £1,945–£9,695 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,895 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
Crash-rated bollards in nearby towns
- Gorseinon (5.2 mi)
- Swansea (10.3 mi)
- Ammanford (10.7 mi)
- Clydach (11.2 mi)
- Carmarthen (13.5 mi)
- Neath (15.4 mi)