Devon · England
Crash-rated bollard installation in Bideford
Planning crash-rated bollards in Bideford? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageBideford crash-rated bollards
Across Bideford, typical sites for crash-rated bollards include town-centre squares, community car parks and high street shopfronts. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
We work across EX39 and EX38 — Bideford itself and places including Northam, Westward Ho!, Hartland and Buckland Brewer. We also cover neighbouring Barnstaple (7.9 miles) — distances are straight-line.
Bideford at a glance
- Area
- Devon, England
- Highway authority
- Devon County Council (local roads)
- Planning authority
- the council for Torridge
- Postcodes
- EX39 and EX38
- Guide price
- Typically £1,995–£9,995 per bollard + VAT; minimum job £3,995
- Survey
- Free, with a fixed written quote
- Nearby
- Barnstaple (7.9 mi)
Guide prices for Bideford
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£5,345 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,395–£7,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,795–£9,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; no regional adjustment. Guide only — the fixed price follows a survey.
Typical crash-rated bollards jobs in Bideford
Typical reasons Bideford sites choose crash-rated bollards:
- Sites where a vehicle dynamics assessment shows a long straight run-up
- Pedestrianised streets, plazas and crowded public spaces
- Glazed frontages on corporate and public buildings
Before we dig in Bideford
The highway authority for local roads in Bideford is Devon County Council; motorways and trunk roads sit with National Highways. Crash-rated bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Bideford need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Torridge before posts go in.
Footways and forecourts in towns are usually crowded with cables, gas mains, water pipes and old drainage, and a single unexpected duct can stop a bollard position. Rated foundations are large, and excavation is often where projects run into trouble.
- Confirm who owns the land: works on public highway usually need the highway authority's agreement, and permanent street furniture there may need a licence.
- Balance the gaps: narrow enough to stop a vehicle, typically no more than about 1,200 mm, but wide enough for wheelchair users and buggies — check against Inclusive Mobility guidance.
What happens on site
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Finishes and options
| Option | Detail |
|---|---|
| Decorative covers | Stainless steel, cast or polymer sleeves can be fitted over the steel core to suit a streetscape. Use covers supplied or approved by the manufacturer so the tested product is not altered. |
| Finishes and visibility bands | Galvanised and powder-coated finishes in RAL colours, with contrasting or reflective bands near the top so the posts are visible to pedestrians and drivers. |
| Rated removable or automatic posts | Where an entrance must open for deliveries or emergency vehicles, rated removable, retractable or automatic models are available. Check that the rating stated is for the exact model and position you are buying. |
What affects the quote
Two Bideford jobs with the same number of posts can price quite differently. The usual reasons:
- Buried services, diversions and ground investigation
- Covers, finishes and any integrated lighting
- Number of posts and whether a linked beam system is needed
Looking after them
Movable rated bollards need a planned servicing schedule. A rated bollard that has stopped a vehicle has done its job and should be assessed with the manufacturer; in most cases the post, and sometimes the foundation insert, is replaced rather than straightened.
For damaged or loose posts in Bideford, repairs and replacements are priced in writing first.
Crash-rated bollards in Bideford: FAQs
Do you install crash-rated bollards in Bideford?
We cover all of Bideford (EX39 and EX38) and the rest of Devon. We also work in Barnstaple.
Do I need consent for crash-rated bollards on a public footway in Bideford?
The highway authority for local roads in Bideford is Devon County Council; motorways and trunk roads sit with National Highways. Crash-rated bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for crash-rated bollards in Bideford?
In Bideford, typically £1,995–£9,995 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,995 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
What does a crash rating code actually tell me?
It tells you the vehicle used in the test, how fast it was travelling, the angle it hit at and how far it got past the bollard line. Your security adviser compares those figures with the vehicle and speed achievable on your approach. A rating that does not match the site's real risk is either more than you need or not enough.
When can we rely on the new bollards?
Only once the concrete has reached the strength set in the specification. The posts are physically in place as soon as the pour is finished, but the rated performance depends on the foundation, and full design strength is commonly taken at around 28 days. Your adviser may arrange temporary measures to cover the gap.