England · 10 towns
Crash-rated bollard installation in Devon
Crash-rated bollards for sites across Devon: surveyed, quoted in writing and installed by our crews.
Computer-generated imageCrash-rated bollards in Devon
Across Devon, typical sites for crash-rated bollards include office forecourts, city-centre plazas and university campuses. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
Highway authorities for local roads in Devon: Devon County Council, Plymouth City Council and Torbay Council.
Choose your town in Devon
Guide prices in Devon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£5,345 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,395–£7,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,795–£9,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; no regional adjustment. Guide only — the fixed price follows a survey.
Who looks after the roads in Devon
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Plymouth | Plymouth City Council | Plymouth City Council |
| Exeter | Devon County Council | the council for Exeter |
| Paignton | Torbay Council | Torbay Council |
| Torquay | Torbay Council | Torbay Council |
| Newton Abbot | Devon County Council | the council for Teignbridge |
| Exmouth | Devon County Council | the council for East Devon |
| Barnstaple | Devon County Council | the council for North Devon |
| Bideford | Devon County Council | the council for Torridge |
| Plymstock | Plymouth City Council | Plymouth City Council |
| Tiverton | Devon County Council | the council for Mid Devon |
Rules for crash-rated bollards in England
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in England.
How installation works
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Fix reinforcement and set the posts
The reinforcement cage is built to the drawing and the bollards are held to line and level in templates. Concrete is poured to the specified grade, with samples taken for testing if the specification calls for them.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Crash-rated bollards in Devon: FAQs
Do you cover all of Devon for crash-rated bollards?
Yes — including Plymouth, Exeter, Paignton, Torquay, Newton Abbot, Exmouth, Barnstaple and Bideford. Enter your postcode in the price calculator to confirm.
How much do crash-rated bollards cost in Devon?
In Devon, typically £1,995–£9,995 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,995 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Devon?
For local roads, Devon County Council, Plymouth City Council and Torbay Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.