Gloucestershire · England
Crash-rated bollard installation in Kingswood
Crash-rated bollards supplied and fitted in Kingswood, Gloucestershire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageCrash-rated bollards in Kingswood
Across Kingswood, typical sites for crash-rated bollards include town-centre squares, schools and community car parks. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
We work across BS15 and BS30 — Kingswood itself and places including Two Mile Hill, Warmley, Oldland and Bitton. We also cover neighbouring Mangotsfield (2.4 miles), Bristol (3.8 miles), Yate (7.2 miles) and Bath (8.3 miles) — distances are straight-line. It sits roughly 4 miles from Bristol as the crow flies.
Kingswood at a glance
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS15 and BS30
- Guide price
- Typically £1,995–£9,995 per bollard + VAT; minimum job £3,995
- Survey
- Free, with a fixed written quote
- Nearby
- Mangotsfield (2.4 mi), Bristol (3.8 mi), Yate (7.2 mi), Bath (8.3 mi)
Crash-rated bollards in Kingswood: common uses
Typical reasons Kingswood sites choose crash-rated bollards:
- Pedestrianised streets, plazas and crowded public spaces
- Data centres, utilities and critical infrastructure perimeters
- Stadiums, arenas and event venues with predictable crowd flows
What crash-rated bollards cost in Kingswood
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£5,345 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,395–£7,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,795–£9,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Kingswood
The highway authority for local roads in Kingswood is South Gloucestershire Council; motorways and trunk roads sit with National Highways. Crash-rated bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Kingswood need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at South Gloucestershire Council before posts go in.
Made ground, a high water table or soft clay may need an engineer to confirm the tested design suits the site; any change to depth, width or reinforcement must be agreed in writing by the manufacturer, or the rating may no longer apply. Footways and forecourts in towns are usually crowded with cables, gas mains, water pipes and old drainage, and a single unexpected duct can stop a bollard position.
- Ask the local planning authority whether consent is needed, particularly in conservation areas or near listed buildings.
- Agree how emergency vehicles will get through, and refer to guidance on selecting and installing vehicle security barriers such as PAS 69 or ISO 22343-2.
Installation, step by step
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Choosing the right spec
| Option | Detail |
|---|---|
| Heights and diameters | Exposed heights are commonly around 800 to 1,000 mm, with core diameters varying by model and rating. Larger diameters are not always needed to achieve a given rating. |
| Finishes and visibility bands | Galvanised and powder-coated finishes in RAL colours, with contrasting or reflective bands near the top so the posts are visible to pedestrians and drivers. |
| Rated removable or automatic posts | Where an entrance must open for deliveries or emergency vehicles, rated removable, retractable or automatic models are available. Check that the rating stated is for the exact model and position you are buying. |
What moves the price in Kingswood
Our South West guide prices are a starting point; the survey in Kingswood firms them up. What tends to move them:
- The rating required and the product range that achieves it
- Buried services, diversions and ground investigation
- Depth and volume of excavation, reinforcement and concrete
Keeping them working
Static rated bollards need little routine work, but they should be inspected periodically and always after any impact. Look for cracked surfacing at the base, movement, damaged covers and faded bands.
If posts in Kingswood are later hit or damaged, we can repair or replace them — see bollard repairs.
Crash-rated bollards in Kingswood: FAQs
Do you install crash-rated bollards in Kingswood?
We cover all of Kingswood (BS15 and BS30) and the rest of Gloucestershire. We also work in Mangotsfield, Bristol and Yate.
Who gives permission for bollards on the pavement in Kingswood?
South Gloucestershire Council is the highway authority covering Kingswood's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do crash-rated bollards cost in Kingswood?
In Kingswood, typically £1,995–£9,995 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £3,995 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Why can't the foundation be adjusted to suit our ground?
Because the rating belongs to the bollard and foundation as tested together. Making the hole shallower, narrower or lighter on steel changes how the system behaves on impact. If site conditions force a change, the manufacturer has to approve it in writing, and some changes mean choosing a different product such as a shallow-mount system.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.
Crash-rated bollards near Kingswood
- Mangotsfield (2.4 mi)
- Bristol (3.8 mi)
- Yate (7.2 mi)
- Bath (8.3 mi)
- Nailsea (10.9 mi)
- Portishead (11.4 mi)