Kent · England
Crash-rated bollard installation in Dartford
Crash-rated bollards supplied and fitted in Dartford, Kent: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageDartford crash-rated bollards
In the town of Dartford, crash-rated bollards tend to go in at filling-station forecourts, high street shopfronts and small industrial units. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
We work across DA1, DA2, DA9 and DA10 — Dartford itself and places including Darenth, Bean, Joyden's Wood and Stonehill Green. Nearby, we also work in Bexley (3.2 miles), Swanley (3.8 miles), South Ockendon (5.2 miles) and Gravesend (6.8 miles), measured as the crow flies.
Dartford at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Dartford
- Postcodes
- DA1, DA2, DA9 and DA10
- Guide price
- Typically £2,095–£10,595 per bollard + VAT; minimum job £4,245
- Survey
- Free, with a fixed written quote
- Nearby
- Bexley (3.2 mi), Swanley (3.8 mi), South Ockendon (5.2 mi), Gravesend (6.8 mi)
What Dartford sites use crash-rated bollards for
Typical reasons Dartford sites choose crash-rated bollards:
- Transport interchanges, taxi ranks and drop-off zones
- Glazed frontages on corporate and public buildings
- Sites where a vehicle dynamics assessment shows a long straight run-up
What crash-rated bollards cost in Dartford
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,095–£5,695 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,645–£8,245 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £7,195–£10,595 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Dartford
In Dartford, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Dartford) first — we flag this at survey.
Reinstatement matches paving, tactile surfaces and kerbs. Made ground, a high water table or soft clay may need an engineer to confirm the tested design suits the site; any change to depth, width or reinforcement must be agreed in writing by the manufacturer, or the rating may no longer apply.
- Balance the gaps: narrow enough to stop a vehicle, typically no more than about 1,200 mm, but wide enough for wheelchair users and buggies — check against Inclusive Mobility guidance.
- Ask the local planning authority whether consent is needed, particularly in conservation areas or near listed buildings.
What happens on site
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Cure, protect and reinstate
The posts are protected while the concrete gains strength, and the surface is reinstated to match. The line should not be treated as fully effective until the specified curing period has passed.
Finishes and options
| Option | Detail |
|---|---|
| Rated removable or automatic posts | Where an entrance must open for deliveries or emergency vehicles, rated removable, retractable or automatic models are available. Check that the rating stated is for the exact model and position you are buying. |
| Heights and diameters | Exposed heights are commonly around 800 to 1,000 mm, with core diameters varying by model and rating. Larger diameters are not always needed to achieve a given rating. |
| Deep or standard foundation designs | Deep foundations suit open ground where excavation is unrestricted. Where services or slabs get in the way, shallow-mount tested designs may be a better fit. |
What affects the quote
When we price crash-rated bollards in Dartford, these make the biggest difference:
- Depth and volume of excavation, reinforcement and concrete
- Traffic management, restricted working hours or night work in occupied sites
- Reinstatement of natural stone, tactile paving or specialist surfaces
After installation
Static rated bollards need little routine work, but they should be inspected periodically and always after any impact. A rated bollard that has stopped a vehicle has done its job and should be assessed with the manufacturer; in most cases the post, and sometimes the foundation insert, is replaced rather than straightened.
We can also service, repair or replace existing posts anywhere in Dartford.
Common questions
Can you install crash-rated bollards anywhere in Dartford?
We cover all of Dartford (DA1, DA2, DA9 and DA10) and the rest of Kent. We also work in Bexley, Swanley and South Ockendon.
Who gives permission for bollards on the pavement in Dartford?
Kent County Council is the highway authority covering Dartford's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do crash-rated bollards cost in Dartford?
In Dartford, typically £2,095–£10,595 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £4,245 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.
Crash-rated bollards near Dartford
- Bexley (3.2 mi)
- Swanley (3.8 mi)
- South Ockendon (5.2 mi)
- Gravesend (6.8 mi)
- Greenwich (7.3 mi)
- Havering (7.9 mi)