Surrey · England
Flexible bollard installation in Egham
Planning flexible bollards in Egham? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout flexible bollards in Egham
Whether it's community car parks, high street shopfronts and local parades, flexible bollards in Egham are planned around who needs to get through and who doesn't. Flexible bollards are traffic management products, not barriers, and will not stop a vehicle that is driven at them.
Coverage in Egham takes in the TW20, GU25, KT16 and KT15 postcode districts and nearby places like Bishopsgate, Stroude, Virginia Water and Trumps Green. We also cover neighbouring Staines (2 miles), Ashford, Surrey (4.1 miles), Windsor (4.1 miles) and Slough (5.7 miles) — distances are straight-line. It sits roughly 18 miles from Reading as the crow flies.
Local details
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Runnymede
- Postcodes
- TW20, GU25, KT16 and KT15
- Guide price
- Typically £225–£685 per bollard + VAT; minimum job £505
- Survey
- Free, with a fixed written quote
- Nearby
- Staines (2 mi), Ashford, Surrey (4.1 mi), Windsor (4.1 mi), Slough (5.7 mi)
Egham: typical flexible bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £225–£415 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £365–£555 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £505–£685 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +15% for London. Guide only — the fixed price follows a survey.
Where flexible bollards go in around Egham
Around Egham, flexible bollards usually solve one of these:
- Marking pedestrian routes inside multi-storey car parks
- Depot and yard routes where vehicles knock posts daily
- Lane separation at car park entrances and exits
Before we dig in Egham
In Egham, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Runnymede) first — we flag this at survey.
Anchors therefore need sound concrete with enough edge distance; anchoring into thin, cracked or weak surfaces means the base works loose within weeks. On tarmac, a small concrete pad or a socket base cast in concrete is the reliable option.
- Do not use flexible bollards where a physical barrier is needed to protect people or buildings; they guide rather than stop.
- On public highway, including cycle lane segregation, the highway authority's agreement and specification are needed.
How the job runs
Fix the bases
Holes are drilled and cleaned, resin anchors or bolts are set and the bases fixed and torqued once cured. Socket bases are set flush in concrete.
Fit posts and test
Posts are fitted and bent by hand to confirm they return upright, and reflective sleeves are applied.
Hand over spares and records
Post and base details are recorded so replacements match, and spare posts can be left on site for busy locations. Staff are shown how a post is swapped on its base.
Choosing the right spec
| Option | Detail |
|---|---|
| Sprung-base bollards | A rigid post on a heavy spring or elastomer base that tilts and returns. Looks like a conventional bollard. |
| Low-profile deck bases | Shallow fixings for multi-storey decks where deep drilling is not permitted. |
| Bolt-down or socket bases | Bolt-down for existing slabs; socket bases allow posts to be replaced without new fixings. |
What moves the price in Egham
Two Egham jobs with the same number of posts can price quite differently. The usual reasons:
- Out-of-hours working in busy car parks
- Bolt-down or socket base
- Polymer posts or sprung-base bollards
Looking after them
Clean reflective sleeves so they stay visible, and replace them when they fade or peel. After resurfacing or line repainting, check that the bases were not disturbed or painted over, and that posts still line up with the new markings.
We can also service, repair or replace existing posts anywhere in Egham.
Questions about flexible bollards in Egham
Do you install flexible bollards in Egham?
We cover all of Egham (TW20, GU25, KT16 and KT15) and the rest of Surrey. We also work in Staines, Ashford, Surrey and Windsor.
Who gives permission for bollards on the pavement in Egham?
Surrey County Council is the highway authority covering Egham's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do flexible bollards cost in Egham?
In Egham, typically £225–£685 per bollard, supplied and fixed, plus VAT, with a minimum job of £505 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Will a flexible bollard stop a car?
No. It is designed to bend and recover, so a car can push past it. It marks the line and discourages drivers from crossing it. Where a vehicle must be physically stopped, use a rigid bollard.
Can a damaged flexible post be replaced on the same base?
Usually, yes, especially with socket bases designed for it. The post is removed and a new one fitted. If the base itself is damaged or loose, it is re-fixed or replaced at the same time.
Flexible bollards near Egham
- Staines (2 mi)
- Ashford, Surrey (4.1 mi)
- Windsor (4.1 mi)
- Slough (5.7 mi)
- Sunbury-on-Thames (6.1 mi)
- Walton-on-Thames (6.8 mi)