Surrey · England
Lighting bollard installation in Woking
Lighting bollards for sites across Woking and the rest of Surrey, from the first measurement to the last relaid paving block.
Computer-generated imageLighting bollards in Woking
Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician. In Woking, that tends to mean sites such as college campuses, industrial estates and business parks.
Coverage in Woking takes in the GU22, GU21 and KT14 postcode districts and nearby places like Pyrford, Pyle Hill, Pyrford Green and Pyrford Village. Jobs in Woking can be combined with work in Guildford (5.8 miles), Egham (7.8 miles), Walton-on-Thames (7.8 miles) and Camberley (8 miles) (straight-line distances). Reading is around 20 miles away.
Woking at a glance
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Woking
- Postcodes
- GU22, GU21 and KT14
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £895
- Survey
- Free, with a fixed written quote
- Nearby
- Guildford (5.8 mi), Egham (7.8 mi), Walton-on-Thames (7.8 mi), Camberley (8 mi)
Lighting bollards in Woking: common uses
Typical reasons Woking sites choose lighting bollards:
- Building entrances and approach routes
- Steps, ramps and changes in level
- Private gardens and long driveways
Lighting bollard prices in Woking
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Woking
Surrey County Council is the highway authority covering Woking's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Woking) first — we flag this at survey.
Most of the work in a lighting bollard scheme is underground. Cable is protected by armour or duct, buried deep enough to avoid garden tools and future paving works, and marked with warning tape.
- Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.
- Limit glare and upward light, and check for any planning or ecology conditions on lighting near sensitive habitats.
How the job runs
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Choosing the right spec
| Option | Detail |
|---|---|
| Mains LED bollards | Wired from a dedicated circuit for reliable lighting of paths and car parks. Needs cable routes and electrical certification. |
| Colour temperature | Warm white for residential and amenity areas; warmer or amber options near sensitive wildlife habitats. |
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
Pricing lighting bollards in Woking
Two Woking jobs with the same number of posts can price quite differently. The usual reasons:
- Number of bollards and their specification
- Distance from the supply and circuit requirements
- Length of cable routes and surfaces to be cut
Keeping them working
LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free. Clean diffusers so dirt and algae do not dim the light, check seals and fixings, and look for impact damage, especially in car parks.
We can also service, repair or replace existing posts anywhere in Woking.
Lighting bollards in Woking: FAQs
Which parts of Woking do you cover for lighting bollards?
We cover all of Woking (GU22, GU21 and KT14) and the rest of Surrey. We also work in Guildford, Egham and Walton-on-Thames.
Do I need consent for lighting bollards on a public footway in Woking?
In Woking, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for lighting bollards in Woking?
In Woking, typically £365–£1,245 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £895 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can bollard lights work on a timer or motion sensor?
Yes. Photocells switch them on at dusk, timers switch them off or dim them late at night and motion sensors bring them up when someone approaches. Combining controls saves energy and reduces light pollution.
Are solar bollard lights worth it?
For marking edges and low-use paths, they can be, because there is no cabling to install. They give less light than mains bollards and perform poorly in shaded spots and short winter days. For lighting a route properly, mains bollards are more dependable.
Lighting bollards in nearby towns
- Guildford (5.8 mi)
- Egham (7.8 mi)
- Walton-on-Thames (7.8 mi)
- Camberley (8 mi)
- Staines (8.1 mi)
- Sunbury-on-Thames (8.5 mi)