Surrey · England
Lighting bollard installation in Egham
Local installation of lighting bollards in Egham — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout lighting bollards in Egham
Outdoor lighting bollards need weatherproof and impact-resistant construction and must be connected and tested by a qualified electrician. In Egham, that tends to mean sites such as community car parks, residential driveways and small industrial units.
We cover Egham's TW20, GU25, KT16 and KT15 postcode districts, including places such as Bishopsgate, Stroude, Virginia Water and Trumps Green. Nearby, we also work in Staines (2 miles), Ashford, Surrey (4.1 miles), Windsor (4.1 miles) and Slough (5.7 miles), measured as the crow flies. Reading is around 18 miles away.
Egham at a glance
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Runnymede
- Postcodes
- TW20, GU25, KT16 and KT15
- Guide price
- Typically £395–£1,395 per bollard + VAT (£465–£1,645 inc VAT for homes); minimum job £965
- Survey
- Free, with a fixed written quote
- Nearby
- Staines (2 mi), Ashford, Surrey (4.1 mi), Windsor (4.1 mi), Slough (5.7 mi)
Guide prices for Egham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£805 + VAT · £465–£965 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £695–£1,095 + VAT · £825–£1,295 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £985–£1,395 + VAT · £1,195–£1,645 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); +15% for London. Guide only — the fixed price follows a survey.
Lighting bollards in Egham: common uses
Common uses in a place like Egham:
- Footpaths through housing developments and campuses
- Car park walkways and pedestrian crossings
- Hotel, restaurant and pub frontages
Before we dig in Egham
In Egham, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Runnymede) first — we flag this at survey.
Bases are set in firm ground with the cable entry facing the right way, and on paved routes the bollards are positioned so cables can be pulled through ducts rather than requiring surfaces to be lifted again later. Most of the work in a lighting bollard scheme is underground.
- Limit glare and upward light, and check for any planning or ecology conditions on lighting near sensitive habitats.
- Have the electrical installation designed, installed, tested and certified by a qualified electrician to BS 7671.
From survey to handover
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Electrical connection
A qualified electrician installs the circuit protection, makes the connections in weatherproof enclosures and fits controls such as a photocell or timer.
Specification choices
| Option | Detail |
|---|---|
| Controls | Photocells, timers, motion sensors and dimming to light only when and as much as needed. |
| Mains LED bollards | Wired from a dedicated circuit for reliable lighting of paths and car parks. Needs cable routes and electrical certification. |
| Body materials and finishes | Powder-coated aluminium or steel, or stainless steel, in colours to suit the building. |
What moves the price in Egham
Two Egham jobs with the same number of posts can price quite differently. The usual reasons:
- Mains or solar bollards
- Controls such as photocells, timers or sensors
- Length of cable routes and surfaces to be cut
Looking after them
LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free. If a run of bollards trips the circuit after rain, water ingress at a connection is the usual cause and needs an electrician.
We can also service, repair or replace existing posts anywhere in Egham.
Lighting bollards in Egham: FAQs
Do you install lighting bollards in Egham?
We cover all of Egham (TW20, GU25, KT16 and KT15) and the rest of Surrey. We also work in Staines, Ashford, Surrey and Windsor.
Do I need consent for lighting bollards on a public footway in Egham?
Surrey County Council is the highway authority covering Egham's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for lighting bollards in Egham?
In Egham, typically £395–£1,395 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£465–£1,645 including VAT for homeowners), with a minimum job of £965 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Can bollard lights work on a timer or motion sensor?
Yes. Photocells switch them on at dusk, timers switch them off or dim them late at night and motion sensors bring them up when someone approaches. Combining controls saves energy and reduces light pollution.
Do lighting bollards need an electrician to install?
Yes, mains lighting bollards must be connected by a qualified electrician, who tests and certifies the circuit. We arrange that as part of the job. Solar bollards avoid mains work but provide less light.
Lighting bollards in nearby towns
- Staines (2 mi)
- Ashford, Surrey (4.1 mi)
- Windsor (4.1 mi)
- Slough (5.7 mi)
- Sunbury-on-Thames (6.1 mi)
- Walton-on-Thames (6.8 mi)