Berkshire · England
Lighting bollard installation in Slough
Planning lighting bollards in Slough? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout lighting bollards in Slough
In the town of Slough, lighting bollards tend to go in at high streets, retail parks and industrial estates. Outdoor lighting bollards need weatherproof and impact-resistant construction and must be connected and tested by a qualified electrician.
Coverage in Slough takes in the SL1, SL2 and SL3 postcode districts and nearby places like Poyle and Colnbrook. Nearby, we also work in Windsor (1.8 miles), Maidenhead (5.4 miles), Gerrards Cross (5.6 miles) and Egham (5.7 miles), measured as the crow flies. Reading is around 17 miles away.
Key facts for this area
- Area
- Berkshire, England
- Highway authority
- Slough Council (local roads)
- Planning authority
- Slough Council
- Postcodes
- SL1, SL2 and SL3
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £895
- Survey
- Free, with a fixed written quote
- Nearby
- Windsor (1.8 mi), Maidenhead (5.4 mi), Gerrards Cross (5.6 mi), Egham (5.7 mi)
Typical lighting bollards jobs in Slough
Common uses in a place like Slough:
- Footpaths through housing developments and campuses
- Steps, ramps and changes in level
- Car park walkways and pedestrian crossings
Lighting bollard prices in Slough
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); +6% for South East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Slough
The highway authority for local roads in Slough is Slough Council; motorways and trunk roads sit with National Highways. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Slough is listed or inside a conservation area, check with the local planning authority (Slough Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Most of the work in a lighting bollard scheme is underground. Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services.
- Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.
- Limit glare and upward light, and check for any planning or ecology conditions on lighting near sensitive habitats.
How the job runs
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Choosing the right spec
| Option | Detail |
|---|---|
| Light distribution | 360-degree, asymmetric or louvred heads to light paths while limiting glare and light spill. |
| Colour temperature | Warm white for residential and amenity areas; warmer or amber options near sensitive wildlife habitats. |
| Body materials and finishes | Powder-coated aluminium or steel, or stainless steel, in colours to suit the building. |
What affects the quote
Two Slough jobs with the same number of posts can price quite differently. The usual reasons:
- Distance from the supply and circuit requirements
- Mains or solar bollards
- Controls such as photocells, timers or sensors
After installation
LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free. If a run of bollards trips the circuit after rain, water ingress at a connection is the usual cause and needs an electrician.
For damaged or loose posts in Slough, repairs and replacements are priced in writing first.
Common questions
Can you install lighting bollards anywhere in Slough?
We cover all of Slough (SL1, SL2 and SL3) and the rest of Berkshire. We also work in Windsor, Maidenhead and Gerrards Cross.
Do I need consent for lighting bollards on a public footway in Slough?
In Slough, work on adopted pavements and verges needs consent from Slough Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do lighting bollards cost in Slough?
In Slough, typically £365–£1,245 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £895 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will lighting bollards survive in a car park?
Choose robust bodies with a high impact rating and place them where vehicles are unlikely to hit them, such as behind kerbs or alongside protective posts. A lighting bollard is not designed to stop a car.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
Lighting bollards near Slough
- Windsor (1.8 mi)
- Maidenhead (5.4 mi)
- Gerrards Cross (5.6 mi)
- Egham (5.7 mi)
- Hillingdon (6.7 mi)
- Staines (6.7 mi)