Berkshire · England
Telescopic bollard installation in Slough
Local installation of telescopic bollards in Slough — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageSlough telescopic bollards
In the town of Slough, telescopic bollards tend to go in at industrial estates, supermarket frontages and college campuses. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We work across SL1, SL2 and SL3 — Slough itself and places including Poyle and Colnbrook. Nearby, we also work in Windsor (1.8 miles), Maidenhead (5.4 miles), Gerrards Cross (5.6 miles) and Egham (5.7 miles), measured as the crow flies. Reading is around 17 miles away.
Key facts for this area
- Area
- Berkshire, England
- Highway authority
- Slough Council (local roads)
- Planning authority
- Slough Council
- Postcodes
- SL1, SL2 and SL3
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Windsor (1.8 mi), Maidenhead (5.4 mi), Gerrards Cross (5.6 mi), Egham (5.7 mi)
Telescopic bollard prices in Slough
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Telescopic bollards in Slough: common uses
Typical reasons Slough sites choose telescopic bollards:
- Shared drives that need occasional closing
- Allocated parking bays in flats and private developments
- Commercial yards where posts must not be left lying around
Consents, ground and services in Slough
Slough Council is the highway authority covering Slough's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Slough Council) first — we flag this at survey.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- If the drive is shared, agree positions and keys with the other users first.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What affects the quote
Two Slough jobs with the same number of posts can price quite differently. The usual reasons:
- Number of posts and keyed-alike locks
- Post size and whether lift assistance is wanted
- Drainage: simple soakaway or a connection to a drain
Looking after them
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
If posts in Slough are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Which parts of Slough do you cover for telescopic bollards?
We cover all of Slough (SL1, SL2 and SL3) and the rest of Berkshire. We also work in Windsor, Maidenhead and Gerrards Cross.
Do I need consent for telescopic bollards on a public footway in Slough?
Slough Council is the highway authority covering Slough's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Slough?
In Slough, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Telescopic bollards in nearby towns
- Windsor (1.8 mi)
- Maidenhead (5.4 mi)
- Gerrards Cross (5.6 mi)
- Egham (5.7 mi)
- Hillingdon (6.7 mi)
- Staines (6.7 mi)