Buckinghamshire · England
Telescopic bollard installation in Gerrards Cross
Telescopic bollards for sites across Gerrards Cross and the rest of Buckinghamshire, from the first measurement to the last relaid paving block.
Computer-generated imageAbout telescopic bollards in Gerrards Cross
Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads. In Gerrards Cross, that tends to mean sites such as filling-station forecourts, small industrial units and residential driveways.
Coverage in Gerrards Cross takes in the HP9 and SL0 postcode districts and nearby places like Beaconsfield, Seer Green, Iver Heath and Iver. Jobs in Gerrards Cross can be combined with work in Chalfont St Peter (1.6 miles), Rickmansworth (5 miles), Hillingdon (5.5 miles) and Slough (5.6 miles) (straight-line distances). Reading is around 20 miles away.
Key facts for this area
- Area
- Buckinghamshire, England
- Highway authority
- Buckinghamshire Council (local roads)
- Planning authority
- Buckinghamshire Council
- Postcodes
- HP9 and SL0
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Chalfont St Peter (1.6 mi), Rickmansworth (5 mi), Hillingdon (5.5 mi), Slough (5.6 mi)
What telescopic bollards cost in Gerrards Cross
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Where telescopic bollards go in around Gerrards Cross
Typical reasons Gerrards Cross sites choose telescopic bollards:
- Access roads closed outside working hours
- Car parks where a removable post would go missing
- Allocated parking bays in flats and private developments
Before we dig in Gerrards Cross
Buckinghamshire Council is the highway authority covering Gerrards Cross's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Buckinghamshire Council) first — we flag this at survey.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Positions are scanned and hand-dug before committing.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
From survey to handover
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
What affects the quote
Our South East guide prices are a starting point; the survey in Gerrards Cross firms them up. What tends to move them:
- Drainage: simple soakaway or a connection to a drain
- Number of posts and keyed-alike locks
- Surface type and quality of reinstatement
After installation
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
We can also service, repair or replace existing posts anywhere in Gerrards Cross.
Common questions
Do you install telescopic bollards in Gerrards Cross?
We cover all of Gerrards Cross (HP9 and SL0) and the rest of Buckinghamshire. We also work in Chalfont St Peter, Rickmansworth and Hillingdon.
Who gives permission for bollards on the pavement in Gerrards Cross?
In Gerrards Cross, work on adopted pavements and verges needs consent from Buckinghamshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do telescopic bollards cost in Gerrards Cross?
In Gerrards Cross, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Telescopic bollards in nearby towns
- Chalfont St Peter (1.6 mi)
- Rickmansworth (5 mi)
- Hillingdon (5.5 mi)
- Slough (5.6 mi)
- Amersham (6.2 mi)
- Windsor (7.4 mi)