Berkshire · England
Telescopic bollard installation in Windsor
Local installation of telescopic bollards in Windsor — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout telescopic bollards in Windsor
Because the post stays in its cassette, there is nothing to store and nothing to lose. In Windsor, that tends to mean sites such as schools, filling-station forecourts and community buildings.
We cover Windsor's SL4 postcode district, including places such as Eton, Eton Wick and Oakley Green. Nearby, we also work in Slough (1.8 miles), Egham (4.1 miles), Staines (5.4 miles) and Maidenhead (5.8 miles), measured as the crow flies. Reading is around 16 miles away.
Local details
- Area
- Berkshire, England
- Highway authority
- Windsor and Maidenhead Council (local roads)
- Planning authority
- Windsor and Maidenhead Council
- Postcodes
- SL4
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Slough (1.8 mi), Egham (4.1 mi), Staines (5.4 mi), Maidenhead (5.8 mi)
Telescopic bollards in Windsor: common uses
Common uses in a place like Windsor:
- Access roads closed outside working hours
- Commercial yards where posts must not be left lying around
- Shared drives that need occasional closing
Guide prices for Windsor
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Windsor
The highway authority for local roads in Windsor is Windsor and Maidenhead Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Windsor need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Windsor and Maidenhead Council before posts go in.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
From survey to handover
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
What moves the price in Windsor
Two Windsor jobs with the same number of posts can price quite differently. The usual reasons:
- Surface type and quality of reinstatement
- Stainless or powder-coated finish
- Excavation depth and the presence of services under the drive
Looking after them
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
For damaged or loose posts in Windsor, repairs and replacements are priced in writing first.
Questions about telescopic bollards in Windsor
Do you install telescopic bollards in Windsor?
We cover all of Windsor (SL4) and the rest of Berkshire. We also work in Slough, Egham and Staines.
Who gives permission for bollards on the pavement in Windsor?
In Windsor, work on adopted pavements and verges needs consent from Windsor and Maidenhead Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for telescopic bollards in Windsor?
In Windsor, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Telescopic bollards in nearby towns
- Slough (1.8 mi)
- Egham (4.1 mi)
- Staines (5.4 mi)
- Maidenhead (5.8 mi)
- Ashford, Surrey (7.1 mi)
- Gerrards Cross (7.4 mi)