Surrey · England
Shallow-mount security bollard installation in Egham
Shallow-mount bollards supplied and fitted in Egham, Surrey: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageEgham shallow-mount bollards
Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation. In Egham, that tends to mean sites such as schools, filling-station forecourts and town-centre squares.
We work across TW20, GU25, KT16 and KT15 — Egham itself and places including Bishopsgate, Stroude, Virginia Water and Trumps Green. Nearby, we also work in Staines (2 miles), Ashford, Surrey (4.1 miles), Windsor (4.1 miles) and Slough (5.7 miles), measured as the crow flies. Egham is about 18 miles from Reading.
Egham at a glance
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Runnymede
- Postcodes
- TW20, GU25, KT16 and KT15
- Guide price
- Typically £2,295–£10,395 per bollard + VAT; minimum job £5,745
- Survey
- Free, with a fixed written quote
- Nearby
- Staines (2 mi), Ashford, Surrey (4.1 mi), Windsor (4.1 mi), Slough (5.7 mi)
Guide prices for Egham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,295–£5,695 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,695–£8,095 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £7,145–£10,395 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
What Egham sites use shallow-mount bollards for
Typical reasons Egham sites choose shallow-mount bollards:
- Lines that must cross over shallow drainage or ducts
- Bridges and structures where excavation depth is limited
- Listed or historic streets where deep digging is unwelcome
Consents, ground and services in Egham
The highway authority for local roads in Egham is Surrey County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Egham is listed or inside a conservation area, check with the local planning authority (the council for Runnymede) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail. Paving is often natural stone in the streets where these systems are used, so careful lifting, storage and relaying is part of the job.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
- Agree works and separation distances with utility owners, and with the highway authority where the line is on public highway.
From survey to handover
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Specification choices
| Option | Detail |
|---|---|
| Rated planters and street furniture | Benches, planters and cycle stands built around a tested shallow core, used where a line of posts would look out of place. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
What moves the price in Egham
Our London guide prices are a starting point; the survey in Egham firms them up. What tends to move them:
- Length of run and the system needed to achieve the rating
- Changes of direction, end details and removable positions
- Amount of hand digging needed around live services
Looking after them
Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands. Any later utility work beside the line should be supervised so the frame is not undermined.
For damaged or loose posts in Egham, repairs and replacements are priced in writing first.
Shallow-mount bollards in Egham: FAQs
Can you install shallow-mount bollards anywhere in Egham?
We cover all of Egham (TW20, GU25, KT16 and KT15) and the rest of Surrey. We also work in Staines, Ashford, Surrey and Windsor.
Do I need consent for shallow-mount bollards on a public footway in Egham?
The highway authority for local roads in Egham is Surrey County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for shallow-mount bollards in Egham?
In Egham, typically £2,295–£10,395 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,745 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Will future roadworks damage the system?
They can if contractors dig beside it without knowing it is there. That is why we provide as-built drawings showing the frame position. Ask anyone excavating nearby to check those drawings first.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Shallow-mount bollards in nearby towns
- Staines (2 mi)
- Ashford, Surrey (4.1 mi)
- Windsor (4.1 mi)
- Slough (5.7 mi)
- Sunbury-on-Thames (6.1 mi)
- Walton-on-Thames (6.8 mi)