Surrey · England
Warehouse and loading-bay bollards in Egham
Warehouse impact bollards for sites across Egham and the rest of Surrey, from the first measurement to the last relaid paving block.
Computer-generated imageEgham warehouse impact bollards
Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses. In Egham, that tends to mean sites such as community car parks, high street shopfronts and local parades.
We cover Egham's TW20, GU25, KT16 and KT15 postcode districts, including places such as Bishopsgate, Stroude, Virginia Water and Trumps Green. Nearby, we also work in Staines (2 miles), Ashford, Surrey (4.1 miles), Windsor (4.1 miles) and Slough (5.7 miles), measured as the crow flies. It sits roughly 18 miles from Reading as the crow flies.
Egham at a glance
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Runnymede
- Postcodes
- TW20, GU25, KT16 and KT15
- Guide price
- Typically £205–£1,395 per bollard + VAT; minimum job £505
- Survey
- Free, with a fixed written quote
- Nearby
- Staines (2 mi), Ashford, Surrey (4.1 mi), Windsor (4.1 mi), Slough (5.7 mi)
What warehouse impact bollards cost in Egham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£695 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £555–£1,045 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,395 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +15% for London. Guide only — the fixed price follows a survey.
Where warehouse impact bollards go in around Egham
Typical reasons Egham sites choose warehouse impact bollards:
- Sprinkler risers, electrical panels and gas meters
- Pedestrian crossings and the ends of walkways
- Building columns in forklift aisles and turning areas
Consents, ground and services in Egham
In Egham, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Egham need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Runnymede before posts go in.
Where a slab is too thin or poor, the options include through-bolting, a larger base plate to spread load, a polymer bollard that reduces anchor forces, or breaking out and casting a new local foundation. Warehouse floors vary from thick reinforced slabs to thin toppings over older concrete, and some contain underfloor heating, ducting or wire-guidance systems for automated trucks that must not be cut.
- Where impact performance matters, ask for products tested to PAS 13 and match the stated performance to your vehicles.
- Use your workplace transport risk assessment to decide where protection is needed, in line with HSE guidance on workplace transport.
What happens on site
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Fix, torque and mark
Bollards and guards are fixed and torqued, then any associated floor markings are applied so drivers can see protected zones.
Options to consider
| Option | Detail |
|---|---|
| Diameters and heights | Commonly 114–273 mm diameter and around 600–1,200 mm high, chosen for vehicle type and mast or fork height. |
| Column and rack end guards | Wrap-around or corner protectors for columns and racking uprights where a single post will not fit. |
| Door frame protection | Bollards or low barriers either side of dock doors and roller shutters to protect frames and guides. |
What moves the price in Egham
Two Egham jobs with the same number of posts can price quite differently. The usual reasons:
- Steel or polymer bollards and the impact performance needed
- Removal of damaged existing protection
- Floor marking and associated signage
After installation
On steel bollards look for bending, cracked welds, loose or sheared anchors and cracked concrete around the base plate. Inspect warehouse bollards regularly as part of routine site checks, and after any reported impact.
If posts in Egham are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about warehouse impact bollards in Egham
Do you install warehouse impact bollards in Egham?
We cover all of Egham (TW20, GU25, KT16 and KT15) and the rest of Surrey. We also work in Staines, Ashford, Surrey and Windsor.
Do I need consent for warehouse impact bollards on a public footway in Egham?
The highway authority for local roads in Egham is Surrey County Council; motorways and trunk roads sit with National Highways. Warehouse impact bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for warehouse impact bollards in Egham?
In Egham, typically £205–£1,395 per bollard, supplied and fixed, plus VAT, with a minimum job of £505 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Should we choose steel or polymer warehouse bollards?
Steel suits lighter traffic and sound, thick slabs where cost matters most. Polymer suits busy forklift areas where repeated impacts would destroy anchors and floors. Polymer often costs more to buy but less to keep in service.
Can bollards be fixed to a thin warehouse floor?
Sometimes, using larger base plates, through-bolts or polymer bollards that reduce anchor loads. If the slab is too thin or damaged, a new local foundation may be needed. We check the slab before recommending a fixing.
Warehouse bollards near Egham
- Staines (2 mi)
- Ashford, Surrey (4.1 mi)
- Windsor (4.1 mi)
- Slough (5.7 mi)
- Sunbury-on-Thames (6.1 mi)
- Walton-on-Thames (6.8 mi)