Essex · England
Pedestrian protection bollards in Harwich
Pedestrian protection bollards supplied and fitted in Harwich, Essex: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageHarwich pedestrian protection bollards
We supply and fit pedestrian protection bollards throughout Harwich, typically for sites such as filling-station forecourts, community car parks and local parades. Products range from unrated steel posts to bollards tested against low-speed impacts under PAS 170-1.
Coverage in Harwich takes in the CO12 postcode district and nearby places like Great Oakley, Parkeston, Little Oakley and Stones Green. We also cover neighbouring Felixstowe (3.2 miles), Ipswich (9.8 miles), Clacton-on-Sea (11.9 miles) and Colchester (16.6 miles) — distances are straight-line. It sits roughly 37 miles from Southend-on-Sea as the crow flies.
Key facts for this area
- Area
- Essex, England
- Highway authority
- Essex County Council (local roads)
- Planning authority
- the council for Tendring
- Postcodes
- CO12
- Guide price
- Typically £255–£1,245 per bollard + VAT; minimum job £605
- Survey
- Free, with a fixed written quote
- Nearby
- Felixstowe (3.2 mi), Ipswich (9.8 mi), Clacton-on-Sea (11.9 mi), Colchester (16.6 mi)
Where pedestrian protection bollards go in around Harwich
Typical reasons Harwich sites choose pedestrian protection bollards:
- School and hospital drop-off zones
- Outdoor seating at cafes, pubs and restaurants
- EV charging points and trolley shelters
Harwich: typical pedestrian protection bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £255–£665 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £545–£955 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,245 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
Permissions and groundwork in Harwich
The highway authority for local roads in Harwich is Essex County Council; motorways and trunk roads sit with National Highways. Pedestrian protection bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Tendring) first — we flag this at survey.
Reinstatement keeps walkways level and flush, because a trip edge around a new post in a busy car park creates the very hazard the posts are meant to reduce. Raised kerbs also change the picture: a high kerb slows a wheel but does not stop a bumper, so the post still needs to sit within reach of the overhang rather than behind it.
- If a tested product has been requested, confirm PAS 170-1 or another stated standard and install to the tested foundation.
- Record why posts are where they are in the site's risk assessment, especially at drive-thrus and seating areas.
How the job runs
Watch how the site works
The free site survey looks at where cars park, where people walk and queue, and where incidents or near misses have happened. You receive a fixed written quote with positions marked.
Excavate and set
Each position is cut, dug and checked for services, and the posts are set plumb in concrete to a consistent height.
Add bands and markings
Reflective bands are fitted and any wheel stops or line markings agreed in the scheme are installed.
Options to consider
| Option | Detail |
|---|---|
| Stainless or architectural finishes | Stainless sleeves or decorative posts for shop entrances and public-facing frontages. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts, for sites where proven performance has been asked for. |
| Lit bollards | Low-level lighting bollards double as protection on walkways where the product is robust enough for the job. |
What affects the quote
When we price pedestrian protection bollards in Harwich, these make the biggest difference:
- Finishes such as stainless or decorative posts
- Unrated steel or PAS 170-1 tested products
- Number of posts and length of line
Keeping them working
If one post keeps being hit, look at the bay layout or add a wheel stop rather than replacing the same post repeatedly. Damaged posts near entrances should be dealt with quickly, as a bent post with a torn edge is a hazard in its own right.
For damaged or loose posts in Harwich, repairs and replacements are priced in writing first.
Common questions
Do you install pedestrian protection bollards in Harwich?
We cover all of Harwich (CO12) and the rest of Essex. We also work in Felixstowe, Ipswich and Clacton-on-Sea.
Who gives permission for bollards on the pavement in Harwich?
In Harwich, work on adopted pavements and verges needs consent from Essex County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do pedestrian protection bollards cost in Harwich?
In Harwich, typically £255–£1,245 per bollard, supplied and installed, plus VAT, with a minimum job of £605 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards block trolleys?
They should not if gaps are planned for trolleys and wheelchairs. Main routes to trolley bays need wider openings. We set gaps to suit the way the site works.
Do pedestrian protection bollards need to be crash-rated?
Not usually. They deal with low-speed driver errors, so firmly founded steel posts often suffice. Where an owner, insurer or designer wants proven performance, PAS 170-1 tested products are the usual choice.