Hampshire · England
Ram-raid protection bollards in Basingstoke
Ram-raid bollards supplied and fitted in Basingstoke, Hampshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRam-raid bollards in Basingstoke
We supply and fit ram-raid bollards throughout Basingstoke, typically for sites such as town-centre streets, college campuses and retail parks. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Basingstoke takes in the RG21, RG24, RG22, RG23, RG25 and RG26 postcode districts and nearby places like Old Basing, Sherborne St John, North Waltham and Cliddesden. Nearby, we also work in Fleet (11.1 miles), Thatcham (12.3 miles), Yateley (12.4 miles) and Farnham (12.8 miles), measured as the crow flies. Reading is around 14 miles away.
Key facts for this area
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Basingstoke and Deane
- Postcodes
- RG21, RG24, RG22, RG23, RG25 and RG26
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
Where ram-raid bollards go in around Basingstoke
Around Basingstoke, ram-raid bollards usually solve one of these:
- Pharmacies and late-opening premises
- Filling station kiosks and forecourt shops
- Warehouses and trade counters with roller-shutter entrances
Basingstoke: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Basingstoke
Hampshire County Council is the highway authority covering Basingstoke's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Basingstoke and Deane) first — we flag this at survey.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
From survey to handover
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Specification choices
| Option | Detail |
|---|---|
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
Pricing ram-raid bollards in Basingstoke
Two Basingstoke jobs with the same number of posts can price quite differently. The usual reasons:
- Removable positions and their locks
- Out-of-hours working to avoid closing the shop
- Reinstatement of forecourt or natural stone surfaces
After installation
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them.
We can also service, repair or replace existing posts anywhere in Basingstoke.
Common questions
Which parts of Basingstoke do you cover for ram-raid bollards?
We cover all of Basingstoke (RG21, RG24, RG22, RG23, RG25 and RG26) and the rest of Hampshire. We also work in Fleet, Thatcham and Yateley.
Do I need consent for ram-raid bollards on a public footway in Basingstoke?
The highway authority for local roads in Basingstoke is Hampshire County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do ram-raid bollards cost in Basingstoke?
In Basingstoke, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Ram-raid bollards near Basingstoke
- Fleet (11.1 mi)
- Thatcham (12.3 mi)
- Yateley (12.4 mi)
- Farnham (12.8 mi)
- Aldershot (14 mi)
- Newbury (14.1 mi)