Kent · England
Ram-raid protection bollards in Broadstairs
Planning ram-raid bollards in Broadstairs? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageRam-raid bollards in Broadstairs
In the town of Broadstairs, ram-raid bollards tend to go in at small industrial units, high street shopfronts and schools. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover every part of Broadstairs in the CT10 postcode district. We also cover neighbouring Ramsgate (1.9 miles), Margate (2.9 miles), Deal (9.5 miles) and Herne Bay (13.6 miles) — distances are straight-line.
Broadstairs at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Thanet
- Postcodes
- CT10
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
Where ram-raid bollards go in around Broadstairs
Common uses in a place like Broadstairs:
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Premises that have already been targeted once
- Filling station kiosks and forecourt shops
Ram-raid bollard prices in Broadstairs
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Broadstairs
Kent County Council is the highway authority covering Broadstairs's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Broadstairs is listed or inside a conservation area, check with the local planning authority (the council for Thanet) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
What happens on site
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Finishes and options
| Option | Detail |
|---|---|
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
Pricing ram-raid bollards in Broadstairs
Our South East guide prices are a starting point; the survey in Broadstairs firms them up. What tends to move them:
- Number of posts across the frontage or ATM
- Removable positions and their locks
- Covers and finishes for shopping streets
After installation
Ram-raid bollards are robust but not maintenance-free. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
If posts in Broadstairs are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install ram-raid bollards in Broadstairs?
We cover all of Broadstairs (CT10) and the rest of Kent. We also work in Ramsgate, Margate and Deal.
Do I need consent for ram-raid bollards on a public footway in Broadstairs?
Kent County Council is the highway authority covering Broadstairs's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for ram-raid bollards in Broadstairs?
In Broadstairs, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.